Ronix 8907 Manual page 9

-To insert the battery cartridge, align the tongue on the battery cartridge
with the groove in the housing and slip it into place. Always insert it all
the way until it locks in place with a little click.
-Do not use force when inserting the battery cartridge. If the cartridge
does not slide in easily, it is not being inserted correctly.
FORWARD (CLOCKWISE) OPERATION:
The motor has an electronic clutch with three different forward speed
settings: 1, 2, and 3 (low, medium and high).
The speed setting is adjustable by pushing the S button on the
Electronic clutch control panel on the base of the tool. If the trigger is
momentarily pushed the Electronic Clutch will be activated. If one green
LED is illuminated, the motor is set to Speed 1. If two green LEDs are
illuminated then the motor is set to speed 2 and three green LEDs for
speed 3. Push the button marked S on the Electronic clutch control
panel to cycle through the three speed settings and select the correct
one for your specific application.
Speed
1s Speed
2nd Speed
3rd Speed
Reverse
10
BRUSHLESS IMPACT DRIVER
Button
RPM
0-1600
0-2000
0-2500
0-2500
Battery cartridge
IPM
0-1800
0-2500
0-3300
0-3300
Max. Torque
200NM
280NM
350NM
350NM