Checking the Battery Level
Check the battery level after replacing the batteries and before using the
camera.
Battery Life
Temperature
At 20˚C
At –20˚C
• The battery life shown above is based on Canon's testing conditions
with new batteries.
• Figures in parentheses apply when the Eye Control switch is
• If nothing is displayed on the LCD panel, the batteries may have been
installed incorrectly. Take out the batteries and install correctly.
• If you often press the shutter button halfway for a prolonged period or just
autofocus without taking a picture, the battery life will be affected.
• When not using the camera, set the Mode Dial to
Turn the Mode Dial to a shooting
mode.
•
Hold down the dial's lock release
button while turning the dial.
The camera will then turn on and the
s
LCD panel will display one of the
following battery level mark:
0% Flash Use
125 (115) rolls
70 (65) rolls
: Battery level OK.
: The battery level is low. Keep
spare batteries handy.
: The batteries will soon be
completely exhausted.
: Replace the batteries.
50% Flash Use 100% Flash Use
38 (33) rolls
20 (19) rolls
<2>.
(With 24-ex. rolls)
19 (17) rolls
10 (9) rolls
<1>.
19