Bulb Exposures - Canon EOS ELAN7NE-30V Instructions Manual

Bulb Exposures

When bulb is set, the shutter is open while you keep pressing the shutter
button fully. Bulb exposures are useful when long exposures are required
for night scenes, fireworks, astronomical photography, etc.
• Remote Switch RS-60E3 (sold separately) is convenient for bulb exposures.
• Bulb exposures are also possible with the Remote Controller RC-1/RC-5
(sold separately). When you press the transmit button, the exposure will
start. To end the exposure, press the button again.
• With a new set of batteries, the maximum bulb exposure time (at 20˚C) will
be about 10 hours.
★
1
Turn the Mode Dial to <W>.
2
Set the shutter speed to "y".
•
Look at the LCD panel and turn the
<l> dial to select "y".
•
"y" follows "K"
3 Select the desired aperture value.
•
Turn the <i> switch to <1> and
turn the <u> dial.
4 Start the bulb exposure.
During the bulb exposure, "y"
s
blinks on the LCD panel.
•
The bulb exposure continues as long
as you hold down the shutter button.
71