Table of Contents
Advertisement
Inserting a CD/DVD
1. Press the button on the front of
the drive to open the disk tray
and pull the tray open.
2. Place the disk on the tray, label
side up.
3. Place the disk on the central
spindle and press gently until the
disk clicks into place.
4. Slide back the tray until it clicks
shut.
Removing a Disk
1. Make sure the computer is not
accessing the DVD+CD-RW
drive.
2. Press the eject button and pull
the tray all the way out.
3. Pick up the CD/DVD by the
edges and remove the
DVD+CD-RW from the tray.
Push the tray into the computer
until it closes fully.
Warning: When the computer is reading from the
DVD+CD-RW, the indicator light for the CD-ROM will
flash on. Do not attempt to remove a disk while
this light is active.
Precautions for Handling CD-ROM Discs
Keep these precautions in mind when handling CD-ROM discs.
•
Always hold the disc by the edges; avoid touching the surface of the disc.
•
Use a clean, dry, cloth to remove dust, smudges, or fingerprints. Wipe from the center outward.
•
Do not write on the surface of the disc.
•
Extremes in temperature may damage discs. Store discs in a cool dry place.
© 2003 AVERATEC, Inc.
Getting Started
Advertisement
Table of Contents
