Related Manuals for Unfinished Furniture of Wilmington T-17B
Summary of Contents for Unfinished Furniture of Wilmington T-17B
- Page 1 : JAVA PEDESTAL Item No. : T-17B AND T-48RT OR T-52T OR T-60RT (PACKED IN SEPARATE BOX) ITEM : T-17B AND T-48RT OR T-52T OR T-60RT Printed in Vietnam (PACKED IN SEPARATE BOX) REVISED DEC 06, 2014 - 1 -...
-
Page 2: Before Assembly
When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please make sure you have the following parts: Description Sketch Description Sketch Pedestal column ITEM : T-17B AND T-48RT OR T-52T OR T-60RT Printed in Vietnam (PACKED IN SEPARATE BOX) REVISED DEC 06, 2014 - 2 -... -
Page 3: Hardware List
Attach legs (C) to the pedestal ( B) with washers (2) and (3) and nuts (1) as shown below. Tighten with the wrench (4). ITEM : T-17B AND T-48RT OR T-52T OR T-60RT Printed in Vietnam (PACKED IN SEPARATE BOX) - Page 4 Place the plate on top of the pedestal (B), attach with washers (6) and (2) and nuts (3) as shown below. Tighten with the Wrench (4). ITEM : T-17B AND T-48RT OR T-52T OR T-60RT Printed in Vietnam (PACKED IN SEPARATE BOX)
- Page 5 Carefully put the pedestal block on the bottom side of the table top, attach the top to plate with bolts and washers (from step 2) and tighten with the Allen key (5). ITEM : T-17B AND T-48RT OR T-52T OR T-60RT Printed in Vietnam...