ASROCK H670 PG Riptide User Manual page 40

2
B A
B A
B
NUT2 NUT1
Step 3
Depending on the PCB type and
length of your M.2_SSD (NGFF)
module, find the corresponding nut
location to be used.
Step 4
Prepare the M.2 standoff that comes
with the package. Then hand tighten
the standoff into the desired nut
location on the motherboard. Align
and gently insert the M.2 (NGFF)
SSD module into the M.2 slot. Please
be aware that the M.2 (NGFF) SSD
module only fits in one orientation.
20
o
Step 5
Tighten the screw that come with the
package with a screwdriver to secure
the module into place.
H670 PG Riptide
33