ASROCK H670 PG Riptide User Manual page 31

SPI TPM Header
(13-pin SPI_TPM_J1)
(see p.7, No. 21)
Thunderbolt AIC
Connector
(5-pin TB1)
(see p.7, No. 27)
RGB LED Header
(4-pin RGB_LED1)
(see p.7, No. 24)
Addressable LED
Headers
(3-pin ADDR_LED1)
(see p.7, No. 25)
(3-pin ADDR_LED2)
(see p.7, No. 8)
(3-pin ADDR_LED3)
(see p.7, No. 7)
24
SPI_DQ3
SPI_PWR
Dummy
CLK
SPI_MOSI
RST#
TPM_PIRQ
1
SPI_TPM_CS#
GND
RSMRST#
SPI_MISO
SPI_CS0
SPI_DQ2
1
+12V G R B
1
GND
DO_ADDR
VOUT
GND
DO_ADDR
VOUT
1
This connector supports SPI
Trusted Platform Module (TPM)
system, which can securely store
keys, digital certificates, passwords,
and data. A TPM system also helps
enhance network security, protects
digital identities, and ensures
platform integrity.
Please connect a
Thunderbolt™ add-in card
(AIC) to this connector via
the GPIO cable.
*Please install the Thunderbolt™
AIC card to PCIE3 (default slot).
This RGB header is used to connect
RGB LED extension cable which
allow users to choose from
various LED lighting effects.
Caution: Never install the
RGB LED cable in the wrong
orientation; otherwise, the cable
may be damaged.
*Please refer to page 54 for further
instructions on this header.
These headers are used to connect
Addressable LED extension cables
which allow users to choose from
various LED lighting
effects.
Caution: Never install the Ad-
dressable LED cable in the wrong
orientation; otherwise, the cable
may be damaged.
*Please refer to page 55 for
further instructions on this header.