Hardware Address (Dip Switch) - Ebyte MA02-AAC 2220 Series User Manual

2di + 2ai + 2do

Hide thumbs Also See for MA02-AAC 2220 Series:

Table of Contents

Chengdu Ebyte Electronic Technology Co.,Ltd.

【2DI+2AI+2DO】MA02-AACX2220 User Manual

Figure 4-3-1 Device address

The default device address is: 32 (hardware address 31 + software address 1 = device address 32).

Device address setting range: 1～247.

Hardware address: realized by the dial switch (5 digits) dial setting (the factory default is 31).

Software address: It is realized by the "offset address" set by the configuration tool software (the factory default is 1).

For example:

If the hardware address is set to 5 and the software address is set to 113, the device address is 118.

4.3.2 Hardware address (dip switch)

Figure 4-4-2 Hardware address (Dip switch)

Hardware address: The DIP switch can switch different hardware addresses, and the binary system represents the 5-digit

DIP switch.

The "5" direction indicates the high position, and the "1" direction indicates the low position. The hardware address range

can be adjusted from 0 to 31.

Hardware address dialing setting instructions:

Example 1: Set hardware address 0 (default), binary code.

Table of Contents