Page 2
Warning This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environ- ment.
Read Before Installing 1. Keep the Orb Cam and all accessories out of reach of children and pets. 2. Power supply voltage that is required to operate Orb Cam should be DC5V. 3. The product can only be used in proper temperature and humidity: Operating temperature: -10°C to 50°C (14°F to 122°F)
Page 7
Set Up With The Netvue App Download the Netvue App from App Store or Google Play. Follow the in-app instruction to complete the entire set up process.
Page 8
Mount Your Orb Cam You can mount your Orb Cam on the wall. 1. Use the provided drilling template to mark the location of holes on the wall. Then use the drill bit (6mm) to drill two holes, and then install anchors to hold screws.
Page 9
2. Install the Mounting Bracket with the Screws provided.
Page 10
3. Adjust the angle to the proper position. Then, fix the Orb Cam to the Mounting Bracket.
Status Light Netvue Orb Cam uses status light to communicate messages. Status Light Description Solid Green Online Rapidly Flashing Green Wi-Fi Configuration Mode None Offline...
Need help?
Do you have a question about the Orb Cam and is the answer not in the manual?
Questions and answers