Page 2
Warning This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Insert Micro SD Card Sentry Camera comes with a built-in card slot which supports up to 128GB Micro SD card. Once you insert the storage card, the camera will automati- cally start to record and store videos in the storage card. You can view those videos on the ‘Replay’...
5. Please do not install the camera where is likely struck by lightning. Note: 1. Netvue Sentry Camera only works with 2.4GHz Wi-Fi. 2. Strong lights may interfere with the ability to scan the QR code. 3. Avoid placing the device behind furniture or near microwaves.
Page 8
Set Up with Netvue App Download the Netvue App from App Store or Google Play. Follow the in-app instruction to complete the entire set up process.
Page 9
Sentry Camera Installation Check the following things before you start to drill holes on your wall: 1. Sentry Camera has been successfully added to your Netvue App and is able to stream video. 2. Have planned the cable route. Measured the length of the power cable and Ethernet cable (if you plan to use Ethernet connection) you will need.
Page 11
Step 2: If you are going to install camera on wood, just skip this step. If you are going to install camera on concrete or brick: Before you start to drill, make sure you know the locations of wall-in pipes and electrical wires. (If you are not comfortable with drilling holes, please consult with a licensed electrician.) Use the provided drilling template to mark the position of holes on your wall.
Page 12
Step 3: Loosen the security screw and take off the backplate, then install it on the wall by provided mounting screws.
Page 14
Step 4: Hang Sentry Camera on the backplate, then tighten the security screw.
Page 15
Step 5 (Wired Connection): Read this step if you are using wired connection, otherwise skip this step. A weatherproof tube is needed for Ethernet cable to avoid leaking water into Ethernet cable port. Insert the cable into the weatherproof tube, and then connect it to the Ethernet cable port of Sentry Camera.
Status Light Netvue Sentry Camera uses status light to indicate the device status. Status Light Description Solid Green Online Rapidly Flashing Green Wi-Fi Configuration Mode None Offline...
Page 17
Human Detection: It uses machine learning to accurately identify people within your Netvue video, sending you specific human alerts when a human is detected, while still sending regular motion alerts for non-human activity. Visit my.netvue.com to learn more.
Page 19
DECLARATION OF CONFORMITY I hereby declare that the product Sentry Camera Product name: Model name: NI-3250, Series model : NI-3251,NI-3252,NI-3253,NI-3254,NI-3255, NI-3256,NI-3257,NI-3258,NI-3259 HW: J14IP SW: 5.10.7(75843) (Name of product, type or model, batch or serial number) ...
Page 20
Point of contact: Netvue Technologies Co.,Ltd. Telephone : +86-0755-86227808 Tax number: +86-0755-86227808 (Name, telephone and fax number) Room A501‐502,Academy of Aerospace Technology,10 Kejinan Road,Nanshan District,Shenzhen,China,518057...
Need help?
Do you have a question about the NI-3250 and is the answer not in the manual?
Questions and answers