Input Source Adjustments - Fujitsu Plasmavision PDS4203 User Manual

INPUT SOURCE ADJUSTMENTS (VIDEO MODE)
This operation can also be done
using the buttons on the Display's
operation panel.
2 8
EXAMPLE: SETTING COMPONENT VIDEO
Setting must be done when connecting a color difference signal to the
COMPONENT VIDEO terminal.
1
Select SOURCE from the
VIDEO MENU screen.
1) In COMPONENT VIDEO
mode, press the MENU but-
ton.
2) With the ADJUST button, se-
lect SOURCE.
3) Set by pressing the SET
button.
This setting can be done in
COMPONENT VIDEO mode
only.
2
Select the adjustment
item.
With the SET button, select COM-
PONENT VIDEO.
Pressing the SET button moves
the selection to the next item as
below.
COMPONENT VIDEO
COMPONENT VIDEO and
CLAMP PULSE are set for
COMPONENT VIDEO mode.
VIDEO SYSTEM can be set for
VIDEO mode and S-VIDEO
mode.
3
Set the connected equip-
ment.
Select with the ADJUST button.
MODE 1: Use this mode for nor-
m a l u s a g e s u c h a s D V D ,
BETACAM or other standard com-
ponent video signals.
MODE 2: Use this mode only for
MUSE signal (Hi-Vision – Japa-
nese high definition video signal).
To complete adjustments
Press the MENU button to return to the VIDEO MENU.
Pressing the MENU button returns the display to the previous screen and closes
the adjustment screen.
COMPONENT VIDEO and CLAMP PULSE can be set in COMPONENT
VIDEO mode only. VIDEO SYSTEM can be set in VIDEO mode and S-VIDEO
mode only.
Example: When SOURCE is selected
CLAMP PULSE
Example: When COMPONENT VIDEO is
Example: When MODE 1 is selected
selected