Dpms And Display Language Setting - Fujitsu Plasmavision PDS4203 User Manual

DPMS AND DISPLAY LANGUAGE SETTING

DPMS SETTING
The time until the power conservation function operates can
be set.
Select with the ADJUST button.
Pressing the ADJUST button moves the selection to the next item as below.
LANGUAGE (DISPLAY LANGUAGE) SETTING
The language for the display can be set.
Select with the ADJUST button.
Pressing the ADJUST button moves the selection to the next item as below.
Note: The setting title and guidance display also change.
Setting titles
Adjustment items
• An adjustment item is selected each time the SET button is pressed.
DPMS
DPMS stands for Display Power Management Signaling. It is a function that automatically reduces the amount of power
consumed by the monitor.
When the power is on, if no signal is input within the set time, the power management function is triggered, the monitor screen
is automatically switched off, and the monitor goes on standby.
This signal wait time can be set from 1 to 5 minutes in units of one minute. Also, the power management function can be
switched off. (The factory setting is OFF.)
This display has a five-language on screen menu.
ENGLISH-A --------------- American English
ENGLISH-B --------------- British English
DEUTSCH ----------------- German
FRANÇAIS ---------------- French
ESPAÑOL ------------------ Spanish
If there is no operation for 60 seconds, the screen display goes off.
Example: When OFF is selected
LANGUAGE
ENGLISH-A
MENU RETURN SET NEXT
SELECT
Example: When ENGLISH-A is selected
2 3