lamber P550-dy-CVP-S Instruction Manual
  1. Manuals
  2. Brands
  3. lamber Manuals
  4. Dishwasher
  5. P550-dy-CVP-S
  6. Instruction manual

lamber P550-dy-CVP-S Instruction Manual

Utensil washer
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
UTENSIL WASHER
P550-dy
P550-dy-CVP-S
INSTRUCTIONS
MANUAL
REV.10-2016

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the P550-dy-CVP-S and is the answer not in the manual?

Questions and answers

Related Manuals for lamber P550-dy-CVP-S

Summary of Contents for lamber P550-dy-CVP-S

  • Page 1 UTENSIL WASHER P550-dy P550-dy-CVP-S INSTRUCTIONS MANUAL REV.10-2016...

  • Page 3: Declaration Of Conformity

    DECLARATION OF CONFORMITY The following : LAMBER snc di Affaba F. e C. – Via Italia 6 – 26855 Lodi Vecchio (LO) ITALY Declare under our responsibility that: Apparatus: WARE WASHER Trademark: LAMBER Manufacturer : LAMBER P550-dy / P550-dy-CVP-S matr………………...
  • Page 4 The directive mentioned above, to which make reference for further details, provides for punitive actions in case of illegal disposal of such waste. Lamber guarantees a percentage of recovery at least of 90% in medium weight for each equipment. The 80% - always as regards the medium weight- of recovered material is recycled or reused.
  • Page 5 INDEX General notes pag. 06 Introduction and safety notes pag. 07 Learn to use the appliance pag. 08 First section - FOR THE USER pag. 09 Control panel pag. 10 Working and use pag. 11 Instructions before washing pag. 11 Washing pag.

  • Page 6: General Norms

    GENERAL NORMS ENGLISH Thank You for purchasing our Ware-washer. Perfect washing-up results as far as hygiene concerns and a correct operation of the Ware-washer can be assured only in case the instructions reported in the present manual are carefully followed. We hope the information reported in the present manual will be helpful to You.

  • Page 7: Introduction And Safety Notes

    INTRODUCTION AND SAFETY NOTES INTRODUCTION - The machine is an Industrial Ware-washer. - Noise level of the machine: (Norms EN ISO 4871 and EN ISO 11204) <70 dB(A) - PRELIMINARY OBSERVATION Carefully read the instructions reported in the present user manual, as it gives important indications about safety of installation, operation and maintenance: carefully keep the present manual for further consultations;...
  • Page 8 Learn to use the appliance P550-dy-CVP-S (only Steam condenser ExtractableSteam condenser filter P550-dy-CVP-S) (only Stainless steel Upper rotating washing Stainless steel Tank with slanting bottom Upper rotating rinsing ( cone 90°) Stainless steel Double skin with insulation 14mm Lower rotating rinsing (cone 90°)

  • Page 9: Instructions For The User

    INSTRUCTIONS FOR THE USER...

  • Page 10: Control Panel

    CONTROL PANEL Main switch Cycle pushbutton Interactive display Wash time selection pushbutton Programming pushbutton Dis.1 09-2013...

  • Page 11: Turn On The Machine

    You will see the serial number of the machine the wash arm and the rinse arm are free to followed by the logo Lamber. pivot; rinse aid and washing powder dispenser Close the door of the ware-washer. containers are loaded.
  • Page 12 15 seconds with clear water at 85°÷90°C. temperature regime reached. The duration of the washing time chosen will then be continued until (only for P550-dy-CVP-S) it reaches the set temperature ((Thermocontrol). At the end of the washing phase there is the automatically activating of the fan for suction of the vapors.
  • Page 13 To re-display the data of the wash cycle, it is necessary to press the switch Attention! At the next cycle the temperature data will not be displayed automatically, but the data (only for P550-dy-CVP-S) will appear in the wash cycle. To temporarly pause the cycle, simply open the ACHIEVEMENTS door of the ware-washer.
  • Page 14 To restart the cycle, put the door down and press again the push button “A” the push-button “B”. The logo Lamber will reappear and will then be able to If the machine is not used for 1 hour, the same start the function SELF-WASHING holding down the turns off completely (the machine “OFF”, even...
  • Page 15 Put the machine OFF by pressing the To make the cycle do the following operations: switch “A” (the display shows LAMBER logo); Punt the machine OFF by pressing the switch “A” (led off) Open the door of the machine;...
  • Page 16 It indicates that a cycle of regeneration of the List of automatic MESSAGES resins varying from 30” to 90” seconds is in progress. On the display may appear some messages to inform about the status of the cycle start of 8- WASH OF THE RESINS : abnormalities.
  • Page 17 OBJETS POSITIONING Warning ! Insert the baskets inside the Only use the baskets machine with the objets as supplied with the pot-washer shown in the picture. H max 640 mm Clearance To achieve optimal cleaning results, make sure that objets are correctly stored inside the machine ITL-3 cod.CC00059 (1x) CLP-52 cod.CC00089 (1x)

  • Page 18: Daily Maintenance

    As they can limit personnel’s regular moving baskets or damaged water pipes not rust-proof. ability! Follow the directions on the maitenance in (only for P550-dy-CVP-S) Clean the filter this guide; of the steam condenser that is placed in the upper part of the hood;...

  • Page 19: Daily Cleaning Of The Interior Of The Dishwasher

    DAILY CLEANING OF THE INTERIOR OF THE DISHWASHER Attenzione. Prima di effettuare la pulizia dell’interno della macchina, assicurarsi che non siano presenti oggetti estranei arrugginiti che potrebbero danneggiare l’acciaio inossidabile all’interno della vasca. Le eventuali particelle di ruggine presente potrebbero provenire da stoviglie non inossidabili, da cestelli danneggiati o condutture dell’acqua non a prova di ruggine.
  • Page 20 Remove the overflow pipe Remove from the tank by means of a brush or cloth if any, residual dirt. Clean the pump inlet filter by Clean the filter tank top means of a brush Clean the filter drawer Clean washing reel.
  • Page 21 Insert in its place the filter Replace the lower washing Insert the tank filter in its drawer s.s.disc place (cod.0800902) Mount the upper washing arm Screw the lower rinse arm ATTENTION! Daily replace the lower and upper wash arms by working on the „big“...

  • Page 22: Detergent And Rinse Aid

    DETERGENT and RINSE-AID Attention. During the use of chemicals is advisable to wear appropriate clothing, such as gloves and protectives glasses. It’s therefore important to consider some factors. Firsf of all, it is necessary to use only strongly anti-foaming Alkali and Chlore Products specific for industrial dishwasher, manufactured by Companies recognized as seriousness.

  • Page 23: Problems - Causes - Solutions

    PROBLEMS - CAUSES - SOLUTIONS PROBLEMS CAUSES SOLUTIONS The machine doesn't catch Main switch is switched off; Turn ON the main switch; Power plug is not inserted Insert the power plug The water doesn't go in Water cock closed; Open water cock; The Overflow is not in place;...
  • Page 24 DESCALING When hard water is used you can find inside the machine and also on dishes calcareous sediments which must be removed both for hygienic and operating reasons by a descaling operation. Operating process and frequency of this intervention are suggested by your cleansing agent supplier who has suitable products, generally containing phosphoric acid.
  • Page 25 USEFUL HINTS FOR STAINLESS STEEL MAINTENANCE Stainless steel is so called because it is not affected by oxidation; this dues its resistance to a thin molecular layer of oxide on the surface which protects againts further oxidation. There are, however, substances which can modify or destroy this layer, giving rise to corrosion: besides preventing the protective film of oxide from reforming, these substances corrode the stainless steel itself and can cause irreparable damage.

  • Page 27: Instructions For The Installer

    INSTRUCTIONS FOR THE INSTALLER The following instructions are addressed to a qualified personnel, the only one authorised to carry out checks and repair, if any. The Manufacturer declines any responsibility in the case of interventions made by a non qualified personnel.

  • Page 31: Second Section - For The Installer

    ENGLISH Second Section - FOR THE INSTALLER During the installation, carry out a good machine levelling, which is a prerequisite for a correct operation. The Manufacturer cannot assume any responsability for any damage to persons or property deriving from the non-observance of the above-specified norms. For a correct installation see draw page 29,30 .
  • Page 32 DUCT: Provide to bring close to the machine a water duct with the above Water installation must have the following characteristics: characteristics, terminating with a gate valve and with a male thread of ¾” Gas. Temperature: 55°C WORKS TEMPERATURES Dynamic Pressure : 2 ÷...

  • Page 33: Detergent Dispenser

    If there is the detergent pump installed by The suction tube of liquid detergent has to be Lamber, data are as follows: passed through the opening spot on the right side Capacity: 1cc/SEC=3,6 Lit/H...

  • Page 34: Descaling Cycle

    DESCALING CYCLE : machines, must be used and they must be produced by well-known reliable Firms. Mean concentration of the cleansing agents in powder For programming, see section CONFIGURATION must be 1,5÷2,5 g/lt. Mean concentration of USER TECHNICAL-PROGRAMMING liquid cleansing agents must be 2÷4 g/lt. In order to avoid scales and corrosions, put The descaling cycle has a duration of about 35 cleansing agent above water level on the...
  • Page 35 - You are recommended to proceed with the cleaning of the dosage hoses and the detergent pump with water once a month. Failure to comply with these guidelines will render this guarantee invalid. Lamber disclaims any liability for consequential damage on the product.
  • Page 36 KEYBOARD INTERACTIVE MEMBRANE Machine OFF ON/OFF push-button "A" for 1 second when the machine is ON (logo LAMBER appears) (with the machine empty the display will show off after 10" seconds) (just with machine full) Machine ON ON/OFF push-button "A" for 1 second when the machine is in OFF (Temperature displayed) with the machine empty the display will indicate "door open"...
  • Page 37 USER TECHNICAL-CONFIGURATION PROGRAMMING "+" Push-button and push-button enter "D" for 5 second with the machine FF and hood open cod. PIN 1000 To view the Unit of measure Unit of measure °C temperatures during temperatures during To confirm To confirm °F washing cycle press push-button...
  • Page 38 Total Cycles (Number of Cycles performed) n°…… (not editable) To confirm Partial Cycles Reset Reset n° n …… yes/no yes/no To confirm To confirm ("yes" to reset value) Automatic Starting To confirm Time phase 2 Time To confirm Filling of the tank (10÷360") Rinsing 2 To confirm...
  • Page 39 dos. Rinsing dos.Rinsing To confirm Dosing time (0÷100%) for the times dispenser of rinsing the table on the manual dos. Discaling dos.discaling To confirm Dosing time Dosing time (0÷100%) (0÷100%) for the times for the times Discaling the table on the manual Without Drain pump this parameter is not Stand By...

  • Page 40: Connections Scheme

    CONNECTIONS SCHEME BOILER Elements Brown Black Black Staples TANK Elements Brown Black Black Staples Hydraulic Rinse aid dispenser (only 015/24l-dy - L25-dy) - To increase the detergent turn Anti-CW the regulation screw Dosatore additivo di risciacquo Doseur de proudit pour rinçage Rinse aid dispenser Nachspülmitteldosiergerät COL-L25-dy-display-2016...
  • Page 45 COMPONENTS Morsetti PCB1 1 2 3 4 P.C.BOARD AD AD CONTROL BOARD SOFT TOUCH CONTROL PANEL optional BASIS Cnp-L25-P550-dy...

  • Page 46: Specifications

    SPECIFICATIONS P550-dy P550-dy-CVP-S MODEL 685x755x1835 685x755x2000 DIMENSIONS l x w x h 30/20/15 30/20/15 WASHING CAPACITY baskets/H 2'-3'-4' 2'-3'-4' Min. WASH CYCLE 520x580 520x580 BASKET SIZE WORK HEIGHT DAYLIGHT 400 V3/N~50Hz 400 V3/N~50Hz VOLTAGE 1x1100 1x1100 WASHING PUMP RINSING PUMP...

This manual is also suitable for:

P550-dy

Table of Contents