Connecting The Scanner; Connecting The Ac Cable; Connecting The Usb Cable - Fujitsu ScanSnap fi-5110EOXM Getting Started

2. Double-click the ScanSnap icon.
The installation of ScanSnap Manager starts up, and
the "Welcome to the ScanSnap Manager Installer"
window appears.
3. Follow the instructions to install the software.
4. After the installation is completed, restart your
computer. Then eject the CD-ROM from the
CD-ROM drive.
Refer to the "ScanScnap Operator's Guide"
ATTENTION
(Manual.pdf) in ScanSnap Setup CD-ROM to
learn more about ScanSnap Manager.

2.2. Connecting the Scanner

After the computer has restarted, please connect the
scanner.

2.2.1. Connecting the AC cable

Do not use cables other than the ones supplied
ATTENTION
with this product. Use only the specified AC cables
and AC adapter.
1. Connect the AC cable to the AC adapter.
2. Insert the connectors of the AC adapter to the scanner
inlet and a power outlet.
Inlet

2.2.2. Connecting the USB cable

Follow the procedure below to connect the USB cable.
ATTENTION
1. Remove the seal from the USB connector.
2. Connect the scanner and your computer with the USB
cable.
3. Open the Paper chute cover of scanner.
ATTENTION
Your computer will automatically detect the scanner.
The installation of ScanSnap is complete!
ATTENTION
Outlet
HINT
ScanSnap fi-5110EOXM for Macintosh Getting Started | 7
●
Use the USB cable supplied with this scanner.
The operation with a commercially available
USB cable is not guaranteed.
●
When connecting to a USB hub, be sure to
connect the scanner to the hub nearest to your
computer (first stage). If you connect it to a USB
hub from the second stage onwards, ScanSnap
may not operate correctly.
USB cable
If the scanner does not automatically turn on,
press the [POWER] button on the scanner.
The "ScanSnap Manager" icon
under it are displayed in Dock menu.
When the icon remains as
[POWER] button to turn off the scanner and then
press the [POWER] button again to restart the
scanner. (Allow at least 5 seconds when you turn
on/off the scanner.)
When using the [POWER] button to turn off/on the
scanner, press it for longer than one second.
*For preventing miss-operation, the [POWER]
button does not work unless it is pressed for longer
than one second.
and a triangle
, press the