Mains Plug Replacement - Black & Decker GST2000-B1 Manual

ENGLISH
• Power plugs must match the outlet.
Never modify the plug in any way.
Unmodified plugs and matching outlets
will reduce risk of electric shock.
• The use of extension cables is not
recommended with this unit.

Mains plug replacement

If a new mains plug needs to be fitted:
• Safely dispose of the old plug
• Connect the brown lead to the live
terminal of the new plug
• Connect the blue lead to the neutral
terminal
• If the product is class I (earthed),
connect the green/yellow lead to the
earth terminal
Warning! If your product is class II double
insulated (only 2 wires in the cord set), no
connection is to be made to the earth
terminal
• Follow the fitting instructions supplied
with good quality plugs
• Any replacement fuse must be of the
same rating as the original fuse supplied
with the product.
Assembly:
Warning! The appliance must be
disconnected from the mains before any
assembly, cleaning or maintenance.
6
1. Insert the telescopic poles into the top of
the unit. Turn the polelocking clamps to
the lock position at the bottom of the
appliance.
2. To attach the clothes hanger, open the
top pole extention clamp on each pole.
Align the tabs in clothes hanger with the
grooves on telescopic poles and push
down firmly. When the clothes hanger is
in place close the pole extention clamps.