Quick Links

Garment steamer


Table of Contents

Summary of Contents for Black & Decker GST2000-B1

  • Page 1 GST2000-B1 Garment steamer English...
  • Page 2: Parts Identification

    ENGLISH ENGLISH ENGLISH Parts Identification Parts Identification Parts Identification 1. Steam head 1. Steam head 1. Steam head 2. Steam head hanger 2. Steam head hanger 2. Steam head hanger 3. Clothes hanger 3. Clothes hanger 3. Clothes hanger 4. Trouser hanger 4.
  • Page 3: Intended Use

    ENGLISH Intended use • Do not use the appliance outdoors. Your BLACK+DECKER appliance is intended • Always protect the motor unit from water for steaming fabrics. or excessive humidity. Do not use this appliance for any other • If the power supply cord is damaged purpose.
  • Page 4 ENGLISH • Do not store away until the appliance • Close supervision is required for any cools down, store the appliance in cool appliance used by or near children. Do dry location when not in use. not leave the appliance unattended while connected.
  • Page 5: Safety Of Others

    ENGLISH • To prevent the appliance over heating, Inspection and repairs when you hang clothes on garment hook for removing winkle, please assemble all • Switch off the appliance before cleaning, attached garment telescopic rod and changing accessories or fitting and extend it at highest position.
  • Page 6: Mains Plug Replacement

    ENGLISH • Power plugs must match the outlet. 1. Insert the telescopic poles into the top of Never modify the plug in any way. the unit. Turn the polelocking clamps to Unmodified plugs and matching outlets the lock position at the bottom of the will reduce risk of electric shock.
  • Page 7 ENGLISH 3. Open the bottom 2 pole extention 4. Insert the trouser hanger into the slots in the clothes hanger and lock into place by clamps on each of the telescopic poles sliding it to the right. and pull the telescopic poles upwards to fully extend the poles.
  • Page 8 ENGLISH Accessories Warning: Whever using this appliance, 1. The Lint pad (17) and Brush (18) can be always wear the heat resistant glove (20) on fitted by simply clipping them on steam head. the hand that is not holding the steam head. 1.
  • Page 9 ENGLISH 7. Press the power switch. (Steam will emit Using the pleat maker in 40-45 seconds) 1. Fit the pleat maker. 2. Open the pleat maker by pulling the handle towards the steam head. 3. Place the material between the pleat maker and the steam head then release the handle.
  • Page 10: Maintenance And Cleaning

    • Clean the appliance with a damp cloth. Never immerse the motor unit in water nor rinse it under the tap. Technical data GST2000-B1 Voltage 220-240 V Frequency 50/60 Hz Power consumption...
  • Page 11: Protecting The Environment

    ENGLISH Protecting the environment Service Information Separate collection. This product must BLACK+DECKER offers a full network of not be disposed of with normal company-owned and authorized service household waste. locations throughout Asia. All BLACK +DECKER Service Centers are staffed with Should you find one day that your Black &...
  • Page 12 2017/6...

Table of Contents