Fujitsu FI-4340C Cleaning And Maintenance page 26

I
Operation status
The operation status is indicated by the following messages:
<Power-on>
<Reading>
<Low Power Mode>
NOTE
One of the following will wake up the scanner:
• Pressing any button.
• Setting the paper on the ADF.
• Sending a command from the host computer.
<Waiting for Start> (Only When the Video Interface Option is installed.)
<Cleaning request>
G
1-8
When the Scanner Display turns Off and the power
"On", the scanner is in the Low Power Mode.
The scanner displays the following screen when waiting for the Start
button to be pressed:
When the Pick roller cleaning is necessary, the scanner displays the
following on the upper line:
When the ADF glass cleaning is necessary, the scanner displays the
following on the LCD:
Clean the Pick roller or the ADF glass in accordance with the
instructions given in "2 CLEANING" (Page 2-1).
indicator remains