Checking Device Running - Huawei SmartAX MA5811S-AE08 Installation Manual

Checking Device Running

Turn on the output switch of the AC power system that supplies for the MA5811S-AE08.
Indicator status:
•After the device is powered on, the RUN/ALM indicator starts (blinking green at an interval of 0.25s).
About 4 minutes later, it is normal (blinking green at an interval of 1s).
•If the upstream port mode is correct and the Rx optical power of the upstream port is within the normal
range, see the following table the UPLINK indicator to check the upstream port status.
•If one or more users connect to a G.fast port and services are correctly configured, see the following
table the LINE indicator to check the G.fast port status.
Indicator
RUN/ALM: running status indicator
Blinking green (0.25s on and 0.25s off
repeatedly)
Blinking green (1s on and 1s off repeatedly)
Steady red
UPLINK: uplink port status indicator
Steady green
Blinking green
Off
LINE: G.fast port status indicator
Steady green
Blinking green
Off
Description
The device is starting up.
The device is working in the normal state.
The device is faulty.
The uplink port is activated.
The uplink port is receiving and transmitting data.
The uplink is not activated.
The G.fast port is activated.
The G.fast port is receiving and transmitting data.
The G.fast port is not activated.
22