Advertisement
Description
There are three flaps on the bump case. When the case is
held as shown in Figure 2, the flaps are on the left, right, and
bottom.
The left flap has a slot in it to allow access to the USB jack,
audio jack, and Compact Flash slot. The right flap can be
opened to remove and install a battery pack. Two openings
on the back of the case provide access to the battery release
latches. The top edge of the case has slots in it to allow access
to the PC Card slot and serial port.
D-RIngs (four places)
Handstraps
Top
Bottom
Velcro Strips (behind flaps)
Figure 1. Pen Tablet PC Bump Case - Rear
2
Advertisement
Also See for Fujitsu Stylistic CE CT2000
Related Manuals for Fujitsu Stylistic CE CT2000
-
Laptop Accessories Fujitsu S6520 - LifeBook - Core 2 Duo 2.4 GHz User Manual
Port replicator (12 pages)
-
Laptop Accessories Fujitsu T2020 - LifeBook Tablet PC User Manual
Port replicator (16 pages)