Using Your Lifebook Security Panel - Fujitsu Lifebook T2010 User Manual

Setting Supervisor Password
You must have set a supervisor password before setting any user passwords. The supervisor password can
bypass the user password.
1
Go to the Start menu.
2
Click on Run.
3
Type in: C:\Program Files\Fujitsu\Security Panel Application\Supervisor\ FJSECS.EXE, then press [Enter]
4
Follow the on-screen instructions to set the Supervisor password.
Setting User Password
1
Go to the Start menu.
2
Click on All Programs.
3
Click on Security Panel Application -> Security Panel Application.
4
Follow the on-screen instructions to set the user password
Y
OU MAY CHANGE OR REMOVE THE SUPERVISOR OR USER PASSWORD BY REPEATING THE STEPS
DEFINED ABOVE

Using Your LifeBook Security Panel

The security lock feature is in effect both when the system resumes from Off, Standby, or Hibernation
state. You always need to push the Security Panel buttons to input the user password. Your system will not
begin the boot sequence until you enter your supervisor/user password.
From Off State
1
Turn on your system.
2
When the Security Indicator flashes, enter the password and press Enter button (e.g., if the password is 22222,
first press Button 2 five times, then press the Enter button). The notebook will boot to normal operation.
.
56 - LifeBook Security/Tablet PC Buttons
.