Standby (Sleep) Mode - Fujitsu Lifebook T2010 User Manual

Standby (Sleep) Mode

Standby (Sleep) mode in Windows saves the contents of your system memory during periods of
inactivity by maintaining power to critical parts. This mode turns off the CPU, display, hard drive, and
all other internal components except those necessary to maintain system memory and for restarting.
Your notebook can be put in Standby mode by:
• Pressing the Power/Suspend/Resume button when your system is turned on.
• Selecting Standby ("Sleep" in Windows Vista) from the Windows Shut Down menu.
• Timing out from lack of activity.
• Allowing the battery to reach the Dead Battery Warning condition.
Your notebook's system memory typically stores the file on which you are working, open application
information, and any other data required to support operations in progress. When you resume
operation from Standby mode, your notebook will return to the point where it left off. You must use
the Power/Suspend/Resume button to resume operation, and there must be an adequate power source
available, or your notebook will not resume.
72 - Power Management