Table of Contents
Advertisement
If you need to ride in reverse, make sure the area behind you is clear
and only operate the ATV at low speed.
WARNING
Improperly operating in reverse could cause
you to hit an obstacle or person behind you,
resulting in serious injury.
Make sure there are no obstacles or people
behind you before selecting reverse gear.
When it is safe to proceed, go slowly.
1. Bring the vehicle to a complete stop, then make sure the
transmission is in neutral.
2. Depress and hold down the brake pedal.
3. Be sure there are no obstacles or people in the way.
4. Shift the shift lever into "R" (reverse) gear.
NOTICE
Your ATV is equipped with a reverse speed limiter, which helps the
vehicle to maintain a safe speed while riding in reverse gear.
NOTICE
If the gearshift lever is moved while the vehicle is moving, the
transmission may be damaged.
5. Release the rear brake pedal.
6. Open the throttle gradually and ride slowly. Do not open the
throttle suddenly or make abrupt turns.
Riding in Reverse
WARNING
3
Basic Operation & Riding
(cont'd)
77
Advertisement
Table of Contents
