Riding In Reverse - Honda TRX400X Owner's Manual

Riding in Reverse

If you need to ride in reverse, make sure the area behind you is clear and
only operate the ATV at low speed.
Improperly operating in reverse could cause you
to hit an obstacle or person behind you,
resulting in serious injury.
Make sure there are no obstacles or people
behind you before selecting reverse gear. When
it is safe to proceed, go slowly.
1. Bring the vehicle to a complete stop, pull in the clutch lever/parking
brake lever ( ) and depress the shift lever ( ) to shift into 1st gear.
2. Depress and hold down the rear brake pedal.
3. Be sure there are no obstacles or people in the way.
4. Leaving your left hand on the clutch lever/parking brake lever,
remove your right hand from the throttle and place it on the reverse
assist knob ( ). Turn the reverse assist knob clockwise.
LEFT HANDLEBAR
(1) clutch lever/
parking brake lever
Basic Operation & Riding
54
1
3
(1)
2
LEFT SIDE
1st
Reverse
(2) shift lever
(2)