Ubiquiti LTU-Lite Quick Start Manual page 13

LTU-Lite Quick Start Guide
The LTU Configuration Interface will appear, allowing you to customize your settings as
needed.
UNMS Management
You can manage your device using UNMS, which lets you configure, monitor, upgrade, and
back up your devices using a single application. Get started at
Find My AP
1. Click the
2. In the Wireless Settings section, change the channel bandwidth (default: 20 MHz) as
needed.
Note:
is set to 20 MHz, then your device will not see that AP and you should change the
channel bandwidth on your device.
3. Click Find AP.
http://dl-origin.ubnt.com/qsg/LTU-Lite/LTU-Lite_EN.html[05.02.2020 14:06:04]
icon.
For example, if the AP's channel bandwidth is set to 50 MHz and your device
www.unms.com