Optical Drive; Optical Drive Software; Loading Media; Removing Media - Fujitsu Lifebook N6010 User Manual

Figure 4-3. Optical Drive

Optical Drive

Your Fujitsu LifeBook notebook contains an optical
drive which is either a Multi-Format DVD Writer or a
DVD/CD-RW combo player. A Multi-Format DVD
Writer allows you to play CDs and DVDs, record CD-Rs
and CD-RWs, and record DVD+/-Rs, DVD+/-RWs, and
DVD-RAMs. A DVD/CD-RW combo drive allows you
to write data onto recordable CDs in addition to all of
the standard DVD drive functions.

OPTICAL DRIVE SOFTWARE

DVD/CD-RW Combo model only: With the combo drive,
you can play DVD movies, read audio CDs, and write
data onto recordable CD-R or CD-RW discs.
Multi-Format DVD Writer model only: With this drive,
you can play CDs and DVDs, record CD+/-Rs and CD+/
-RWs, and record DVD-Rs, DVD-RWs and DVD-
RAMs.
Prior to using your Optical Drive, you
■
must install the Optical Player soft-
ware. Refer to the applicable readme file
on the Driver Applications CD-ROM for
instructions on installing your Optical
Player software.
■ You should periodically check the Fujitsu
Web site at:
http://www.computers.us.fujitsu.com
for current updated drivers.
■ Prolonged use of the optical drive, such
as watching a DVD movie, will
substantially reduce your battery life.
Do not operate your optical drive unless
your LifeBook notebook is sitting on a flat
surface. Using a drive when the system is
not level may damage the drive or prevent
proper operation.
U s e r - I n s t a l l a b l e F e a t u r e s
1 DVD/CD Holder Tray
2 DVD/CD Eject Button

LOADING MEDIA

To load a disc into your optical drive, follow these steps:
1. Push and release the eject button on the front of the
optical drive to open the holder tray. The tray will
come out of the notebook a short distance.
2. Gently pull the tray out until a media disc can easily
be placed in the tray.
There may be a protective sheet in the tray
from when it was shipped; please make sure
it is removed before operating the drive,
otherwise your drive may be damaged.
3. Place the media into the tray, label side up, with the
hole in the center of the disc. Snap the disc onto the
raised circle in the center of the tray.
4. Gently push the holder tray back in until you hear a
click. (Figure 4-4)
If you have disabled the Auto Insert Notifi-
cation Function, you will have to start the
drive from your desktop, since your note-
book will not automatically recognize that
media has been loaded.

REMOVING MEDIA

1. Push and release the eject button on the front of the
optical drive. This will stop the drive and the holder
tray will come out of the notebook a short distance.
2. Gently pull the tray out until the disc can easily be
removed from the tray.
3. Carefully remove the media disc from the holder
tray.
4. Gently push the holder tray back in until you
hear a click.
1
2
35