Optical Drive; Handling Cd/Dvds; Cd/Dvd Indicator - Fujitsu CELSIUS H270 Operating Manual

Using your notebook
Device variant 2
1

Optical drive

Opticaldrive
You can replace your optical drive with another module (e.g. drive or battery)
(see "Modules (device-dependent)", Page
This product contains a light emitting diode, classified in accordance with IEC
8251:1993: LASER CLASS 1, and must therefore not be opened.

Handling CD/DVDs

CD/DVD:
Observe the following guidelines when handling CD/DVDs:
• Avoid touching the surface of a CD/DVD. Hold CDs/DVDs by their edges!
• Always store CDs/DVDs in their cases. This will protect them from dust,
scratches and other damage.
• Protect your CDs/DVDs from dust, mechanical vibration and direct sunlight!
• Avoid storing a CD/DVD in areas subject to high temperatures or humidity.
You may use both 8-cm and 12-cm CDs/DVDs in the optical drive.
When using CDs/DVDs of poor quality vibrations and reading errors may occur.

CD/DVD indicator

CD/DVDindicator
The CD/DVD indicator flashes when a CD/DVD is inserted. The indicator goes out when
the drive is ready for reading. The indicator lights up when the drive is being accessed.
You may only remove the CD/DVD when the indicator is dark.
If the CD/DVD indicator does not go out after inserting a CD/DVD, but instead
continues to flash, this means that the drive cannot access the data carrier.
Either the CD/DVD is damaged or dirty or you are using a data
carrier that the drive cannot read.
22
► Slide the module in the direction of
the arrow into the notebook (1) until it
you feel it lock in place.
19).
A26391-K200-Z226-1-7619, edition 2