Working with the notebook
Inserting battery
► Position the rechargeable battery at the edge and fold it in the direction of the arrow (1).
► Slide the release button in the direction of the arrow (2) and hold it there.
► Slide the rechargeable battery in the direction of the arrow (3) until you feel it engage.
► Slide the release button in the direction of the arrow (4).
► Complete the removal, see chapter
Optical drive (optional)
Opticaldrive
This product contains a light emitting diode, classification according to IEC 60825
1:2007: LASER CLASS 1, and must therefore not be opened.
Handling data carriers
Handling
Observe the following guidelines when handling data carriers:
•
Avoid touching the surface of a data carrier. Only handle data carriers by their edges.
•
Always store data carriers in their cases. This will protect the data carrier against
being covered in dust, scratched or damaged in any other way.
•
Protect your data carriers against dust, mechanical vibrations and direct sunlight.
•
Avoid storing a data carrier in areas subject to high temperatures or humidity.
You can use data carriers with a diameter of 8 cm / 3.15" or 12 cm / 4.7" in the drive.
When using a data carrier of lesser quality, vibrations and reading errors may occur.
32
2
3
"Finishing component removal", Page
3
1
4
54.
Fujitsu