Table of Contents
Advertisement
L i f e B o o k N S e r i e s N o t e b o o k B I O S
Primary Slave Submenu of the Main Menu
The Primary Slave submenu allows you to configure secondary ATA devices.
Main
Primary Slave [HL-DT-ST DVDRAM GMA-4080N-(PS)]
Type:
Multi-Sector Transfers:
LBA Mode Control:
Transfer Mode:
Ultra DMA Mode:
F1
Help
ESC
Exit
Table 3: Fields, Options and Defaults for the Primary Slave Submenu of the Main Menu
Menu Field
Options
■
Type:
Auto
■
None
■
CD-ROM
■
Hard Disk
CHS Format
■
Cylinders:
A number between
0 and 65,535
■
Heads:
A number between
1 and 16
■
Sectors:
A number between
0 and 63
8
PhoenixBIOS Setup Utility
[Auto]
[Disabled]
[Disabled]
[Multiword DMA 2]
[Mode 2]
Select Item
-/Space
Select Menu
Enter
Figure 3. Primary Slave Submenu
Default
[Auto]
–—
–—
–—
Item Specific Help
Select Serial ATA/ATAPI
drive installed here.
[Auto]
The BIOS auto-types the
drive on boot time.
[None]
The drive is disabled.
Change Values
F9
Select
Sub-Menu
F10
Description
NOTE: The Type field does not appear as a drop-down menu. Tap
the spacebar to cycle through the selections.
Selects the ATA/ATAPI device type. Select Auto to have the type
automatically identified by the BIOS at POST. If None is selected, all
of the following Set-up items do not appear. Select CD-ROM,
SuperDisk or Hard Disk for appropriate drive type installed at
this connection.
Cylinders/Heads/Sectors
This item appears only when Hard Disk is selected as the type. This
field is changed by incrementing (pressing the [Spacebar]) or by typ-
ing in the number.
This item appears only when Hard Disk is selected as type. You can
change the value by incrementing (pressing the [Spacebar]) or by
typing in the number.
This item appears only when Hard Disk is selected as type. You can
change the value by incrementing (pressing the [Spacebar]) or by
typing in the number.
Setup Defaults
Save and Exit
Advertisement
Table of Contents
