Table of Contents
Advertisement
L i f e B o o k N S e r i e s N o t e b o o k B I O S
Serial ATA Port 0 Submenu of the Main Menu
The Serial ATA Port 0 submenu indicates whether serial ATA Port 0 devices are auto-typed at boot time.
Main
Type:
F1
Help
ESC
Exit
Table 4: Fields, Options and Defaults for the Serial ATA Port 0 Submenu of the Main Menu
Menu Field
Options
■
Type:
Auto
■
None
Exiting from Main Menu
When you have finished setting the parameters on this menu, you can either exit from the setup utility, or move to
another menu. If you wish to exit from the setup utility, press the [Esc] key or use the cursor keys to go to the Exit
menu. If you wish to move to another menu, use the cursor keys.
10
PhoenixBIOS Setup Utility
Serial ATA Port 0 [None]
[Auto]
Select Item
-/Space
Select Menu
Enter
Figure 4. Serial ATA Port 0 Submenu
Default
[Auto]
Item Specific Help
Select Serial ATA/ATAPI
drive installed here.
[Auto]
The BIOS auto-types the
drive on boot time.
[None]
The drive is disabled.
Change Values
F9
Select
Sub-Menu
F10
Description
Automatically selects the ATA/ATAPI device type. When Auto is
selected, the device type is automatically identified by the BIOS at
POST. Select None if you don't want to select a device.
Setup Defaults
Save and Exit
Advertisement
Table of Contents
