Table of Contents
Advertisement
L i f e B o o k N S e r i e s N o t e b o o k B I O S
Primary Master Submenu of the Main Menu
The Primary Master submenu identifies what ATA devices are installed.
Main
Primary Master [FUJITSU MHV2100AT-(PM)]
Type:
Total Sectors:
Maximum Capacity:
Multi-Sector Transfers:
LBA Mode Control:
Transfer Mode:
Ultra DMA Mode:
F1
Help
ESC
Exit
Table 2: Fields, Options and Defaults for the Primary Master Submenu of the Main Menu
Menu Field
Options
■
Type:
Auto
■
None
LBA Format
Total Sectors:
---
Maximum
---
Capacity:
■
Multi-Sector
Disabled
Transfers:
■
2 Sectors
■
4 Sectors
■
8 Sectors
■
16 Sectors
■
LBA Mode Control:
Disabled
■
Enabled
6
PhoenixBIOS Setup Utility
[Auto]]
LBA Format
195371568
100GB
[16 Sectors]
[Enabled]
[Multiword DMA 2]
[Disabled]
Select Item
-/Space
Select Menu
Enter
Figure 2. Primary Master Submenu
Default
[Auto]
---
---
[16 Sectors]
[Enabled]
Item Specific Help
Select Serial ATA/ATAPI
drive installed here.
[Auto]
The BIOS auto-types the
drive on boot time.
[None]
The drive is disabled.
Change Values
F9
Select
Sub-Menu
F10
Description
Automatically selects the ATA/ATAPI device type. To change the
selection, press the spacebar. Select Auto to have the type automat-
ically identified by the BIOS at POST. Select None if you don't want
to select a primary master.
Logical Block Addressing (LBA)
The total number of sectors on your hard disk
The maximum capacity of your hard disk
This option is automatically selected when Auto is selected.
Indicates whether Logical Block Addressing is enabled or disabled.
This option cannot be changed when Auto is selected.
Setup Defaults
Save and Exit
Advertisement
Table of Contents
