Adjusting The Heating Curves; Instructing The System User - Viessmann VITODENS 100-W Installation And Service Instructions Manual

Adjusting the heating curves

Tap the following buttons:
1.
2. Use / to select "P.3" for the heating curve.
3. OK

Instructing the system user

The system installer should hand the operating instruc-
tions to the system user and instruct the user in oper-
ating the system.
Commissioning, inspection, maintenance
4. Use / to set the slope.
5. OK
6. Use / to set the level.
7. OK to confirm
This includes all components installed as accessories,
e.g. remote control units. In addition, the system instal-
ler must make the user aware of the required mainte-
nance work.
41