Table of Contents
Advertisement
Troubleshooting
Disruptions
Irregular cuts
Low cutting performances
Diagonal cut
Vibrations during cutting
Noise in the extension
Chain noisy when in use
The machine will not start
Unexpected machine
stoppages
Causes
Sharpening defect
Cutting depth limiter gauge too big
Sharpening defect
Cutting depth limiter gauge too small
Sharpening defect
Uneven guide wear
Chain tension defect
Sharpening defect
Significant wear of the pinion
Extension guide damaged
Incorrect lubrication
Machine not powered
Battery discharged
Safety brake activated
Other
Too much pressure on the branches
Overheating
Battery discharged
Other
Solutions
Sharpen or replace the chain
Sharpen or replace the chain
Sharpen or replace the chain
File the limiter or replace the chain
Sharpen or replace the chain
Replace the guide
Tension the chain properly
Sharpen or replace the chain
Replace the pinion
Contact your dealer
Check and top-up the oil level
Clean the chain guide and chain
Contact your dealer
Reconnect it
Recharge the battery.
With the chain saw, check that the
chain brake is unlocked.
Contact your dealer.
Check chain sharpening.
Let the machine cool for 10 minutes
before resuming work
Recharge the battery
Contact your dealer.
29
Advertisement
Table of Contents
