Lubrication Check - infaco TR9 Original User Manual

Lubrication check

IMPORTANT,
therefore important to make sure the lubrication is in working order. INFACO
recommends its highly fluid and tacky oil which is over 90% biodegradable.
Available in two sizes: 5L container ref.: TR500HC and 1L container ref: TR100HC. The
properties of the tacky oil recommended by INFACO reduce spray and improve your chain
lubrication.
To correctly check lubrication:
Once the TR9 has been started, make 10 to 20 cuts and then check for the appearance of
oil at the end of the chain guide. When working, check the end of the chain guide for oil
every hour.
Note: A simple check for oil spray is therefore not sufficient to check correct
lubrication.
Special case:
- First fill
- Extended storage
- Negative temperatures (<0°c)
We recommend to proceed as follows:
- Run the TR9 without cutting for at least 1 minute
- Make 10 to 20 cuts
- Check the end of the chain guide for oil indicating correct lubrication.
Otherwise, contact your dealer.
18
lubrication is essential to correct chainsaw operation. It is