Tred30-16R Start Options; Audible Alarm - LogTag Recorders TRED30-16R Product User Manual

Standard Configuration Options

TRED30-16R Start Options

During configuration with LogTag
temperature readings.
... via Push button
l
a specific start sequence of pressing and releasing the
Logger on
... via Date/Time start
l
specify (local time).
When you choose the push button start option, you can select to record
recording after a
If you configure the TRED30-16R to start after a delay period, the logger will not immediately record
l
temperature readings after you have pressed
instead, and record readings only after the timer has ended. It will, however, continue to take pre-start
readings, if enabled.
You cannot combine a date/time start with pre-start readings or the start delay function.

Audible Alarm

The TRED30-16R is fitted with a buzzer, which can be turned on when an alarm event has been registered
to provide extra feedback. This function is enabled or disabled when
Analyzer.
Please note, that continual activation of the audible alarm will reduce the working life of the
battery. When an alarm event is triggered, the alarm should be cleared as soon as possible.
The alarm will sound once every four seconds for the first 24 hours. To preserve battery life, the interval at
which the alarm sounds will increase to 8 seconds when the clock passes midnight after the initial 24 hour
period (i.e. the alarm will sound every 4 seconds between 24 and 48 hours, depending on when during the
day the alarm was first triggered). When the clock passes midnight again, the interval changes to 12
seconds. It will remain at 12 seconds until the alarm is cleared, the unit stops or is re-configured.
Note: The interval will increase, even if the alarm is re-triggered!
Please see more information about
The beeper will temporarily turn off when you are reviewing data.
Find Quality Products Online at:
TRED30-16R User Guide
®
Analyzer you can decide when the TRED30-16R starts taking
start: The logger will start taking temperature readings after you have gone through
page 13).
: The logger will start taking temperature readings at the date and time you
delay.
GlobalTestSupply
www.
START
START
/CLEAR/STOP
configuring the logger
Alarm Re-triggering on the next page
button (see Starting the
/CLEAR/STOP
pre-start readings or Begin
, but start a countdown timer
with LogTag
.com
sales@GlobalTestSupply.com
7
®