LogTag Recorders TRID30-7 Quick Start Manual

TRID30-7 & TRED30-7 Quickstart Guide
This quickstart guide covers preparation
and use for the following models:
TRID30-7 and TRED30-7
1. SOFTWARE SETUP
Before using your LogTag , you will need to download and install our
®
freely available companion LogTag Analyzer software from our website:
®
www.logtagrecorders.com/software. Simply browse to our software page,
fill in your details and begin your download.
Once it has finished downloading, install LogTag
computer and start the program once it is installed.
(For detailed software download and install instructions, please refer to
the LogTag Analyzer User Guide).
®
2. LOGTAG CONFIGURATION
®
Next you will need an Interface Cradle connected to your computer.
Once connected, your computer should automatically notify you that it
has successfully installed the Cradle onto your computer. Please refer to
www.logtagrecorders.com/support if you are having issues.
Please note: You only require 1 Interface Cradle for all non-USB LogTag
products. You can however, connect as many Cradles as you like if you
wish to configure multiple loggers simultaneously.
With the Software running, the easiest way to configure your LogTag
for use is with the 'LogTag Wizard' which can be accessed by
pressing the 'F2' key on your keyboard or you can browse via the top
navigation menu: 'LogTag' > 'Wizard'.
1
2
3
4
5
6
7
8
9
Analyzer to your
®
1. Provide a 'Description' to identify the logger being configured.
2. Select Push button or Time/Date start.
3. Enter the recording interval you wish to use. The duration
of the shipment and/or number of readings to record changes
according to the recording interval entered.
4. (Optional) Enter a start delay before the logger begins recording.
5. Specify the
6. (Optional) Require the
consecutive or accumulative readings intead of an instant alarm.
7. Specify the
8. (Optional) Require the
®
consecutive or accumulative readings intead of an instant alarm.
9. Optionally specify a password for next configure or download.
"Standard Configuration"
upper temperature alarm threshold.
upper alarm to trigger after a number of
lower temperature alarm threshold.
lower alarm to trigger after a number of
Advanced Configuration Options
Click Advanced Settings to view and change the loggers advanced
®
features including the 'Pause' function, stopping and re-activation,
clearing and preserving alarms, power save and temperature units
displayed (°C or °F).
If you still need further information, please visit the LogTag Recorders
website. For support, visit www.logtagrecorders.com/support
3. START / INSPECT
After configuration with LogTag Analyzer for push button start the
®
word READY is shown, together with the current time in 24 hour
format. If you are using an External Sensor, ensure it is connected.
Press and hold the START button until the word STARTING is
no longer flashing (approx 5 seconds).
If a delay has been configured, the logger will now display the time
remaining. Once recording, the word RECORDING will be shown on
the display.
During recording, the display shows the temperature of the last
reading taken, the current time, battery status and a combination of
alarm status and history. A reading is taken and the display updated
every logging interval as configured in LogTag
When you press the button, the next reading taken by the logger will
be identified in the downloaded data with an inspection mark.
Analyzer.
®
Page 1 of 2