Fujitsu Lifebook L440 User Manual page 90

S e c t i o n F o u r
Table 4-5 Fields, Options and Defaults for the I/O Device Configuration Submenu
Menu Field Options
Base I/O address: 378; 278; 3BC.
(Displayed only when
the parallel port is set
to Enabled.)
Interrupt: (Displayed IRQ 5;IRQ 7.
only when the parallel
port is set to Enabled.)
Floppy disk controller: Enabled; Disabled.
Local Bus IDE adapter: Disabled; Primary;
Secondary; Both.
80
Default Description
[378] Selects the Base I/O address for the parallel port.
[IRQ 7] Sets the interrupt level for the parallel port.
[Enabled] Turns on and off the floppy disk drive controller.
[Both] Sets up the IDE adapter.