Fujitsu Lifebook L440 User Manual page 39

8. Click on the CD-ROM drive manufacturer's
name and model.
9. Click on Properties. The CD-ROM drive
manufacturer's name and model properties
dialogue box will be displayed.
10. Click on the Settings tab.
11. Click on the automatic insertion notifica-
tion box to toggle it off.
12. Click on O K.
13. Click on OK in the system properties
dialogue box.
14. Restart your notebook according to the
message displayed.
You can re - en a ble the functi on by repe a ting the
process except in step 11 ch a n ge the set ting to on .
U s i n g Y o u r L i f e B o o k L S e r i e s
Hard Drive Access Indicator
The Hard Drive Access indicator tells you when
the internal hard drive is being accessed.
Floppy Disk Drive Access Indicator
The Floppy Disk Drive Access indicator tells
you when a floppy disk drive or optional
SuperDisk drive is being accessed. The Floppy
Disk Drive Access indicator will flash when
your software tries to access a floppy disk or
SuperDisk even if no floppy disk drive or
SuperDisk drive is installed.
PC Card Access Indicators
The PC Card Access indicators tell you when
an installed PC Card is being accessed. Card 1
is the connector inside the slot on the right side
of your notebook. The PC Card Access indica-
tor will flash if your software tries to access a
PC Card even if none are installed.
L i f e B o o k L S e r i e s f r o m F u j i t s u
NumLk Indicator
The NumLk indicator tells you the internal key-
boa rd is set in ten - key nu m eric keyp ad mode .
(See pa ge 33 for more info rm a tion on the nu m eri c
keypa d . ) You can activa te the NumLk mode by
pressing the NumLk/Scr Lk key while holding
down the S h i f t key. De activa te the set ting the
same way that you activa ted it.
CapsLock Indicator
The CapsLock indicator tells you when the key-
board is set for all capital letters. Activate the all
capital letters setting by pressing the CapsLock
key on the keyboard. Deactivate the setting the
same way that you activated it.
Scr Lk Indicator
The Scr Lk indicator tells you when scroll lock
is active. You can activate or deactivate the
scroll lock by pressing the NumLk/Scr Lk key.
Deactivate the setting the same way that you
activated it.
29