Fujitsu Lifebook L440 User Manual page 29

S e c t i o n T w o
Product Key
Look in the box that your notebook came in
and you will find a Windows 98 Certificate of
Authenticity shrink w rapped with the Windows
98 Users manual.On the certificate you will
find a bar-code with a number above it. This is
your product key and the number you should
enter on the Product Key screen. When you
have entered the number exactly as shown then
click on the Next> button.
Start Wizard
The Start Wizard screen will appear if you have
entered a valid product key. When you click on
the Finish button the display will flash various
screens as the system identifies what hardware
is installed.
Time Zone
When your notebook has completely identified
all of the installed hardware it will display a
dialog box for entering which time zone you
wish to set the clock to.
18
Printer Setup
When the time zone setup is complete a dialog
box will appear for selecting which printer is to
be attached to your notebook. You do not have
to select a printer at this time. If you do not
wish to select a printer, click on the Cancel
button. If you do wish to sele ct a printer click
on the Next button and answer the questions.
Welcome to Windows 98
When you boot into Windows 98 for the first
time you will see a Welcome to Windows 98
dialog box with several options. Select the first
option, Register Now, to register your LifeBook
L Series notebook. (See page 20 in this section
for details on registering your notebook in
Windows 98.)
Booting the System with
Windows NT 4.0
We strongly recommend that you do not attach
any other external devices and do not put any
CD or floppy disk in your drives until you have
gone through the initial power on sequence.
When you turn on your notebook for the first
time it will display a Fujitsu logo on the screen.
If you do nothing the system will read the har d
drive for the operating system software, flash
the notebook configuration information on the
screen,and then the Windows NT 4.0 Setup
Wizard Screen will appear. You will then be
stepped through the condition of use process.
You must complete this initial process before
you will be able to use your notebook.(If you
wish to access the BIOS setup utility before you
go through the condition of use process you
must press the F2 key while the Fujitsu logo is
still visible. If you press the Esc key while the
Fujitsu logo is still present you will get a boot
menu dialog box which will allow you to select
which drive is to be used for finding the operat-
ing system.) If you turn off the power without
using the on screen Cancel button you will
get an error message when you start your not e-
book again.