Dell UltraSharp U2419HS User Manual page 44

Activate the computer and wake up the monitor to gain access to the OSD.
If you press any button other than the power button, the following messages will appear
depending on the selected input:
U2419HS
Dell UltraSharp 24 Monitor
No DP signal from your device.
Press any key on the keyboard or move the mouse to wake it up.
If there is no display, press the monitor button again to select
the correct input source.
If either DP, HDMI input is selected and the corresponding cable is not connected, a floating
dialog box as shown below appears.
U2419HS
Dell UltraSharp 24 Monitor
No DP Cable
The display will go into Power Save Mode in 4 minutes.
www.dell.com/support/U2419HS
Dell UltraSharp 24 Monitor
No HDMI Cable
The display will go into Power Save Mode in 4 minutes.
www.dell.com/support/U2419HS
See Troubleshooting
44 | Operating the Monitor
U2419HS
U2419HS
or
U2419HS
for more information.
U2719DS
Dell UltraSharp 27 Monitor
No DP signal from your device.
Press any key on the keyboard or move the mouse to wake it up.
If there is no display, press the monitor button again to select
the correct input source.
U2719DS
Dell UltraSharp 27 Monitor
No DP Cable
The display will go into Power Save Mode in 4 minutes.
www.dell.com/support/U2719DS
Dell UltraSharp 27 Monitor
No HDMI Cable
The display will go into Power Save Mode in 4 minutes.
www.dell.com/support/U2719DS
U2719DS
U2719DS
or
U2719DS