Dell U2413 User Manual

Dell U2413 User Manual

User guide
Hide thumbs Also See for U2413:
Table of Contents

Advertisement

Dell™ U2413/U2713H Monitor
User's Guide
Setting the display resolution
Information in this document is subject to change without notice.
© 2012 Dell Inc. All rights reserved.
Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.
Trademarks used in this text: Dell and the DELL logo are trademarks of Dell Inc.; Microsoft and Windows are either trademarks or registered trademarks of Microsoft Corporation in
the United States and/or other countries, Intel is a registered trademark of Intel Corporation in the U.S. and other countries; and ATI is a trademark of Advanced Micro Devices,Inc.
has determined that this product meets the ENERGY STAR guidelines for energy efficiency.
Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any proprietary
interest in trademarks and trade names other than its own.
Model U2413f / U2713Hb
November 2012 Rev. A00

Advertisement

Table of Contents
loading

Summary of Contents for Dell U2413

  • Page 1 ENERGY STAR guidelines for energy efficiency. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own.
  • Page 2: Notes, Cautions, And Warnings

    Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own.
  • Page 3: About Your Monitor

    Back to Contents Page About Your Monitor Dell™ U2413/U2713H Monitor User's Guide Package Contents Product Features Identifying Parts and Controls Monitor Specifications Plug and Play Capability Universal Serial Bus (USB) Interface Card Reader Specifications LCD Monitor Quality and Pixel Policy...
  • Page 4 Stand Power cable (varies by countries) DisplayPort cable (Mini-DP to DP) U2413: DVI-D cable (Single Link) U2713H: DVI-D cable (Dual Link)
  • Page 5: Product Features

    Product Features The Dell U2413/U2713H flat panel display has an active matrix, Thin-Film Transistor (TFT), Liquid Crystal Display (LCD) and LED backlight. The monitor features include: ■ U2413: 60.96 cm (24.0-inch) viewable area display (measured diagonally). 1920 x 1200 resolution, plus full-screen support for lower resolutions.
  • Page 6: Identifying Parts And Controls

    ■ Energy Saver feature for Energy Star compliance. ■ Compatible with Adobe and sRGB color standards. ■ Factory calibrated sRGB and Adobe RGB input source for brand new Dell U2413/U2713H monitor. Dedicated Custom Color Mode (6-axis Color-control) for Saturation , Hue, Gain (RGB) and offset (RGB).
  • Page 7: Back View

    Secure monitor with security cable lock. Dell Soundbar mounting brackets Attach the optional Dell Soundbar. Barcode serial number label Refer to this label if you need to contact Dell for technical support. Cable management slot For cable management. Route cables through the slot.
  • Page 8: Side View

    Side View Label Description Card Reader Card Reader Specifications for more information. USB Down Stream Port Connect your USB devices. Connect your USB devices. USB Down Stream Port This USB port supports BC 1.2 compliance charging devices, at 1.5A max for fast charging.
  • Page 9: Bottom View

    Connect the power cable. connector DC power connector for Connect the power cord for the soundbar (optional). Dell Soundbar Audio Out Connect the soundbar mini stereo plug (Support two channel output ). DisplayPort in Connect your computer with DP cable.
  • Page 10: Monitor Specifications

    Backlight Life (to half 30K hours (typical) 30K hours (typical) initial brightness) *[U2413/U2713H] sRGB coverage is 100% (based on CIE 1931 and CIE 1976), AdobeRGB coverage is 99%( based on CIE 1931 and CIE 1976) . Resolution Specifications Model U2413...
  • Page 11: Supported Video Modes

    Supported Video Modes Model U2413/U2713H Video display capabilities (DVI & DP & HDMI playback) 480p, 480i, 576p, 576i, 720p, 1080p, 1080i Preset Display Modes U2413 Horizontal Frequency Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (Horizontal/Vertical) Display Mode (kHz) VESA, 640 x 480 31.5...
  • Page 12: Electrical Specifications

    88.8 60.0 241.5 Electrical Specifications Model U2413 U2713H Digital DVI-D TMDS, 600 mV for each differential line, positive polarity at 50 ohm input impedance DisplayPort*, 600mV for each differential line, 100 ohm input impedance per differential pair Video input signals...
  • Page 13: Environmental Characteristics

    4.22 lb (1.92 kg) Front frame gloss Black Frame - 5.0 gloss unit (max.) Environmental Characteristics Model U2413 U2713H Temperature Operating 0 °C to 40 °C (0 °F to 104 °F) Storage: -20 °C to 60 °C (-4 °F to 140 °F) Non-operating Shipping: -20 °C to 60 °C (-4 °F to 140 °F)
  • Page 14: Power Management Modes

    Activate the computer and the monitor to gain access to the OSD. ® NOTE: This monitor is ENERGY STAR -compliant. * Zero power consumption in OFF mode can only be achieved by disconnecting the power cord from the monitor. ** Maximum power consumption with max luminance, Dell Soundbar, and USB active.
  • Page 15: Pin Assignments

    Pin Assignments U2413 DVI Connector U2713H DVI (Dual link) Connector 24-pin Side of the Connected Signal Cable 24-pin Side of the Connected Signal Cable Number Number TMDS RX2- TMDS RX2- TMDS RX2+ TMDS RX2+ TMDS Ground TMDS Ground No Connection...
  • Page 16 TMDS Clock- TMDS Clock- DisplayPort Connector (DP in and DP out) 20-pin Side of the Connected Signal Cable Number ML0(p) ML0(n) ML1(p) ML1(n) ML2(p) ML2(n) ML3(p) ML3(n) AUX(p) AUX(n) DP_PWR_Return +3.3 V DP_PWR...
  • Page 17: Mini Displayport Connector

    Mini DisplayPort Connector 20-pin Side of the Connected Signal Cable Number Hot Plug Detect ML3(n) ML3(n) ML2(n) ML0(p) ML2(p) ML0(p) ML1(n) AUX(p) ML1(p) AUX(n) +3.3 V DP_PWR...
  • Page 18: Hdmi Connector

    HDMI Connector 19-pin Side of the Connected Signal Cable Number TMDS DATA 2+ TMDS DATA 2 SHIELD TMDS DATA 2- TMDS DATA 1+ TMDS DATA 1 SHIELD TMDS DATA 1- TMDS DATA 0+ TMDS DATA 0 SHIELD TMDS DATA 0- TMDS CLOCK TMDS CLOCK SHIELD TMDS CLOCK-...
  • Page 19: Universal Serial Bus (Usb) Interface

    Universal Serial Bus (USB) Interface This section gives you information about the USB ports that are available on the monitor. NOTE: This monitor is Super-Speed USB 3.0 compatible. Transfer Speed Data Power Consumption* Rate Super-Speed 5G bps 4.5W (Max, each port) High speed 480M bps 4.5W (Max, each port)
  • Page 20: Card Reader Specifications

    USB Downstream Connector Pin Number 9-pin Side of the Connector SSTX- SSTX+ SSRX- SSRX+ USB Ports 1 upstream - back 4 downstream -2 on back; 2 on left side Power Charging Port- the lower one of two USB ports on left side (port with lightning icon) ;...
  • Page 21: Lcd Monitor Quality And Pixel Policy

    During the LCD Monitor manufacturing process, it is not uncommon for one or more pixels to become fixed in an unchanging state which are hard to see and do not affect the display quality or usability. For more information on Dell Monitor Quality and Pixel Policy, see Dell Support site at: www.dell.com/support/monitors.
  • Page 22: Cleaning Your Monitor

    Maintenance Guidelines Cleaning Your Monitor CAUTION: Read and follow the safety instructions before cleaning the monitor. WARNING: Before cleaning the monitor, unplug the monitor power cable from the electrical outlet. For best practices, follow the instructions in the list below while unpacking, cleaning, or handling your monitor: To clean your anti-static screen, lightly dampen a soft, clean cloth with water.
  • Page 23: Setting Up The Monitor

    Back to Contents Page Setting Up the Monitor Dell™ U2413/U2713H Monitor User's Guide Attaching the Stand Connecting the Monitor Organizing Your Cables Attaching Dell Soundbar AX510/AY511 (Optional) Removing the Monitor Stand Wall Mounting (Optional) Attaching the Stand NOTE: The stand is detached when the monitor is shipped from the factory.
  • Page 24: Connecting Your Monitor

    Connecting Your Monitor WARNING: Before you begin any of the procedures in this section, follow the Safety Instructions. To connect your monitor to the computer: 1. Turn Off your computer and disconnect the power cable. 2. Connect the white (digital DVI-D) or the black (DisplayPort/Mini DP/HDMI) display connector cable to the corresponding video port on the back of your computer. Do not use the four cables on the same computer.
  • Page 25 Connecting the black DisplayPort (DP to DP) cable Connecting the black HDMI cable...
  • Page 26: Connecting The Monitor For Dp Multi-Stream Transport (Mst) Function

    Connecting the Monitor for DP Multi-Stream Transport (MST) function NOTE: U2413/U2713H support the DP MST feature. To make use of this feature, your PC Graphics Card must be certified to DP1.2 with MST option. The default out of factory setting in the U2413/U2713H is DP1.1a.
  • Page 27 2. Go to DisplayPort 1.2 selection 3. Select Enable or Disable accordingly 4. Follow the screen message to confirm selection of DP1.2 or DP1.1a...
  • Page 28 B) Monitor fails to show any content (blank screen) 1. Press OSD button to invoke the Input Source OSD menu 2. Use the button to highlight "DisplayPort" or "Mini DisplayPort"...
  • Page 29 3. Press and hold the key for approximately 8 sec. 4. The DisplayPort configuration message will appear: 5. Use the button to enable DP1.2 or button to exit without making any changes Repeat the above steps to change the setting back to DP 1.1a if necessary. CAUTION: The graphics are used for the purpose of illustration only.
  • Page 30: Connecting The Usb 3.0 Cable

    Connecting the USB 3.0 cable After you have completed connecting the DVI/Mini DP/DP/HDMI cable, follow the procedures below to connect the USB 3.0 cable to the computer and complete your monitor setup: 1. Connect the upstream USB 3.0 port (cable supplied) to an appropriate USB 3.0 port on your computer. (See bottom view for details.) 2.
  • Page 31: Organizing Your Cables

    Organizing Your Cables After attaching all necessary cables to your monitor and computer, (See Connecting Your Monitor for cable attachment,) organize all cables as shown above.
  • Page 32 Do not use with any device other than the Dell Soundbar. NOTE: The Soundbar power connector (+12 V DC output) is for the optional Dell Soundbar only. To attach the Soundbar: At the back of the monitor, attach the Soundbar by aligning the two slots with the two tabs along the bottom of the monitor.
  • Page 33: Removing The Monitor Stand

    Removing the Monitor Stand NOTE: To prevent scratches on the LCD screen while removing the stand, ensure that the monitor is placed on a soft, clean surface. NOTE: This is applicable for a monitor with a stand. When any other stand is bought, please refer to the respective stand setup guide for the set-up instructions. To remove the stand: 1.
  • Page 34: Wall Mounting (Optional)

    Wall Mounting (Optional) (Screw dimension: M4 x 10 mm). Refer to the instructions that come with the VESA-compatible wall mounting kit. 1. Place the monitor panel on a soft cloth or cushion on a stable, flat table. 2. Remove the stand. 3.
  • Page 35: Operating The Monitor

    Back to Contents Page Operating the Monitor Dell™ U2413/U2713H Monitor User's Guide Power On the Monitor Using the Front Panel Controls Using the On-Screen Display (OSD) Menu Setting the Maximum Resolution Using Dell Soundbar Using the Tilt, Swivel, and Vertical Extension...
  • Page 36: Using The Front Panel Controls

    Using the Front Panel Controls Use the control buttons on the front of the monitor to adjust the characteristics of the image being displayed. As you use these buttons to adjust the controls, an OSD shows the numeric values of the features as they change. The following table describes the front panel buttons: Shortcut Front Panel Icon...
  • Page 37: Front Panel Button

    Use the Exit key to go back to the main menu or exit the OSD main menu. Exit Use the Power key to turn the monitor On and Off. The white LED indicates the monitor is On and fully functional. A glowing LED indicates the U2413/U2713H is in DPMS power save mode. Power...
  • Page 38: Accessing The Menu System

    OSD menu to disappear. 1. Press the key to launch the OSD menu and display the main menu. NOTE: For U2413, the maximum resolution is 1920 x 1200 @ 60Hz. For U2713H, the maximum resolution is 2560 x 1440 @ 60Hz.
  • Page 39 2. Press the keys to move between the setting options. As you move from one icon to another, the option name is highlighted. See the following table for a complete list of all the options available for the monitor. 3. Press the key once to activate the highlighted option.
  • Page 40 Input Source Use the Input Source menu to select between the different video signals that may be connected to your monitor. Scan Sources to select Scan Sources, the monitor auto detects either the DVI-D input or DislpayPort input or Mini DislpayPort input or HDMI input. Press DVI-D Select the DVI-D input when you are using the Digital (DVI) connector.
  • Page 41 Input Color Allows you to set the video input mode to: Format RGB: Select this option if your monitor is connected to a computer or DVD player using the DVI cable. YPbPr: Select this option if your monitor is connected to a DVD player by YPbPr to DVI cable; or if the DVD color output setting is not RGB.
  • Page 42 Gamma Allows you to set the Gamma to PC or MAC.
  • Page 43 CAL1 / CAL2: User calibrated preset mode using Dell Ultrasharp Color Calibration Software or other Dell approved software. Dell Ultrasharp Color Calibration Software works with the X-rite colorimeter i1Display Pro. The i1Display Pro can be purchased from the Dell Electronics, Software and Accessories website.
  • Page 44 For optimal color accuracy of sRGB and AdobeRGB, turn Uniformity Compensation to Off. Custom Color: Allows you to manually adjust the color settings. Press the keys to adjust the three colors (R, G, B) values and create your own preset color mode. Use the keys to select the Gain, Offset, Hue, Saturation.
  • Page 45 Dynamic Contrast provides higher contrast if you select Game or Movie preset mode. Uniformity Compe Select screen brightness and color uniformity compensation settings. Calibrated is factory calibrated setting by default. User is reserved for Dell approved nsation user calibration software settings. Uniformity Compensation adjusts different areas of the screen with respect to the center to achieve uniform brightness and color over the entire screen.
  • Page 46 Display Info Displays the monitor's current settings. Reset Display Select this option to restore default display settings. Settings PIP Settings This function brings up a window displaying image from another input source. U2413 U2713H Sub-Window Sub-Window Main Main Window Window...
  • Page 47 PIP/PBP submenu when PIP/PBP On...
  • Page 48 PIP Mode There are three modes: Picture in Picture (PIP) and Picture by Picture (PBP) and Off. to browse and to select "Off", "PIP" or "PBP". Size Select PIP window size. to browse and to select "Small" or "Large". Position Select PIP window position.
  • Page 49 This display is equipped with a orientation sensor. Rotating the display from Landscape to Pivot (or back) will automatically trigger the OSD to be rotated accordingly. If Dell Display Manager (DDM) is installed and with suitable PC graphics card, the screen content will also be rotated accordingly. Select Auto Rotate to Off to disable this feature.
  • Page 50 LCD Conditioning Helps reduce minor cases of image retention. Depending on the degree of image retention, the program may take some time to run. You can enable this feature by selecting "Enable".
  • Page 51 Factory Reset Reset all OSD settings to the factory preset values. Personalize User can select from "Preset Modes", "Brightness/Contrast", "Input Source", "Aspect Ratio", and "PIP Mode" set as shortcut key.
  • Page 53: Osd Warning Messages

    OSD Warning Messages When the Energy Smart or Dynamic Contrast feature is enabled (in these preset modes: Game or Movie), the manual brightness adjustment is disabled. When the monitor does not support a particular resolution mode, you will see the following message:...
  • Page 54 Monitor Specifications for the Horizontal and Vertical frequency ranges addressable by this monitor. Recommended mode is 1920 x 1200 (for the U2413)/2560 x 1440 (for the U2713H). You will see the following message before the DDC/CI function is disabled: When the monitor enters the Power Save mode, the following message appears: Activate the computer and wake up the monitor to gain access to the OSD.
  • Page 55 When Uniformity Compensation is set to “Calibrated” or “User”, the manual brightness / contrast adjustment is disabled. If either DVI-D or DP or Mini DP or HDMI input is selected and both DVI-D or HDMI or DP cables are not connected, a floating dialog box as shown below appears.
  • Page 56: Setting The Maximum Resolution

    1. For Windows® 8 only, select the Desktop tile to switch to classic desktop. 2. Right-click on the desktop and click Screen resolution. 3. Click the Dropdown list of the Screen resolution and select 1920 x 1200 (U2413) or 2560 x 1440 (U2713H). 4. Click OK.
  • Page 57 Using Dell Soundbar The soundbar has an On/Off power and rotary volume control to adjust the overall sound system, a LED for power indication and two audio headset jacks. Attach mechanism Power/Volume control Headphone jacks Power indicator...
  • Page 58: Using The Tilt, Swivel, And Vertical Extension

    Using the Tilt, Swivel, and Vertical Extension This is applicable for a monitor with a stand. When any other stand is bought, please refer to the respective stand setup guide for set up instructions. NOTE: Tilt, Swivel With the stand attached to the monitor, you can tilt and swivel the monitor for the most comfortable viewing angle. NOTE: The stand is detached when the monitor is shipped from the factory.
  • Page 59: Vertical Extension

    Vertical Extension NOTE: The stand extends vertically up to 115 mm. The figure below illustrates how to extend the stand vertically.
  • Page 60: Rotating The Monitor

    Extension) and fully tilted (Tilt) up to avoid hitting the bottom edge of the monitor. NOTE: To use the Display Rotation function (Landscape versus Portrait view) with your Dell computer, you require an updated graphics driver that is not included with this monitor. To download the graphics driver, go to http://support.dell.com...
  • Page 61: Adjusting The Rotation Display Settings Of Your System

    After you have rotated your monitor, you need to complete the procedure below to adjust the Rotation Display Settings of your system. NOTE: If you are using the monitor with a non-Dell computer, you need to go the graphics driver website or your computer manufacturer website for information on rotating the 'contents' on your display.
  • Page 62: Troubleshooting

    Back to Contents Page Troubleshooting Dell™ U2413/U2713H Monitor User's Guide Self-Test Built-in Diagnostics Common Problems Product Specific Problems Universal Serial Bus (USB) Specific Problems Dell™ Soundbar Problems Card Reader Troubleshooting WARNING: Before you begin any of the procedures in this section, follow the Safety Instructions.
  • Page 63: Built-In Diagnostics

    4. This box also appears during normal system operation, if the video cable becomes disconnected or damaged. 5. Turn Off your monitor and reconnect the video cable; then turn On both your computer and the monitor. If your monitor screen remains blank after you use the previous procedure, check your video controller and computer, because your monitor is functioning properly. Built-in Diagnostics Your monitor has a built-in diagnostic tool that helps you determine if the screen abnormality you are experiencing is an inherent problem with your monitor, or with your computer and video card.
  • Page 64: Common Problems

    LCD screen has spots Cycle power On-Off. Pixel that is permanently Off is a natural defect that can occur in LCD technology. For more information on Dell Monitor Quality and Pixel Policy, see Dell Support site at: www.dell.com/support/monitors. Stuck-on Pixels LCD screen has bright spots Cycle power On-Off.
  • Page 65: Product Specific Problems

    Some computers have both USB 3.0, USB 2.0 and USB 1.1 ports. Ensure that the correct USB port is used. Reconnect the upstream cable to your computer. Reconnect the USB peripherals (downstream connector). Reboot the computer. Dell™ Soundbar Problems Common Symptoms What You Experience Possible Solutions...
  • Page 66: Troubleshooting The Card Reader

    Play some audio content on the computer (i.e. audio CD, or MP3). Turn the Power/Volume knob on the soundbar clockwise to a higher volume setting. Clean and reseat the audio line-in plug. Test the soundbar using another audio source (i.e. portable CD player). Distorted Sound Computer's sound card is used as the Clear any obstructions between the soundbar and the user.
  • Page 67 Reconnect the upstream cable from your computer to the monitor. Reinsert the media. Switch Off and then turn On the monitor again. Reboot the computer. Back to Contents Page...
  • Page 68: Fcc Notices (U.s. Only) And Other Regulatory Information

    NOTE: If you do not have an active Internet connection, you can find contact information on your purchase invoice, packing slip, bill, or Dell product catalog. Dell provides several online and telephone-based support and service options. Availability varies by country and product, and some services may not be available in your area.
  • Page 69: Setting Up Your Monitor

    1. For Windows® 8 only, select the Desktop tile to switch to classic desktop. 2. Right-click on the desktop and click Screen resolution. 3. Click the Dropdown list of the Screen resolution and select 1920 x 1200 (for U2413) or 2560 x 1440 (for U2713H). 4. Click OK.
  • Page 70: If You Have A Dell™ Desktop Or A Dell™ Portable Computer With Internet Access

    , enter your service tag, and download the latest driver for your graphics card. 2. After installing the drivers for your Graphics Adapter, attempt to set the resolution to 1920 x 1200 (for U2413) or 2560 x 1440 (for U2713H) again.
  • Page 71: If You Have A Non Dell™ Desktop, Portable Computer, Or Graphics Card

    7. After installing the drivers for your Graphics Adapter, attempt to set the resolution to 1920 x 1200 (for U2413) or 2560 x 1440 (for U2713H) again. NOTE: If you are unable to set the recommended resolution, please contact the manufacturer of your computer or consider purchasing a graphics adapter that will support the video resolution.

This manual is also suitable for:

U2713h

Table of Contents