Dell UltraSharp U2419HS User Manual page 43

OSD Warning Messages
When the monitor does not support a particular resolution mode, you can see the following
message:
U2419HS
Dell UltraSharp 24 Monitor
The current input timing is not supported by the monitor display. Please
change your input timing to 1920x1080, 60Hz
listed timing as per the monitor specifications.
This means that the monitor cannot synchronize with the signal that it is receiving from
the computer. See Monitor Specifications
addressable by this monitor. Recommended mode is 1920 x 1080 (U2419HS) / 2560 x 1440
(U2719DS).
You can see the following message before the DDC/CI function is disabled:
U2419HS
Dell UltraSharp 24 Monitor
The function of adjusting display setting using PC
application will be disabled.
Do you wish to disable DDC/CI function?
Yes
When the monitor enters the Power Save mode, the following message appears:
U2419HS
Dell UltraSharp 24 Monitor
Entering Power Save Mode.
or any other monitor
U2419HS
for the Horizontal and Vertical frequency ranges
No
U2419HS
U2419HS
U2719DS
Dell UltraSharp 27 Monitor
The current input timing is not supported by the monitor display. Please
change your input timing to 2560x1440, 60Hz
listed timing as per the monitor specifications.
U2719DS
Dell UltraSharp 27 Monitor
The function of adjusting display setting using PC
application will be disabled.
Do you wish to disable DDC/CI function?
Yes
U2719DS
Dell UltraSharp 27 Monitor
Entering Power Save Mode.
Operating the Monitor
or any other monitor
U2719DS
No
U2719DS
U2719DS
| 43