Stereo Line-In Jack; Headphone Jack; Docking Port; External Monitor Port - Fujitsu Lifebook E6150 User Manual

STEREO LINE-IN JACK

The stereo line-in jack allows you to connect an external
audio source to your LifeBook, such as an audio cassette
player. Your audio device must be equipped with a 1/8"
(3.5 mm) stereo mini-plug in order to fit into the stereo
line-in jack of your LifeBook. In order to connect a
external audio source follow these easy steps: (See Figure
2-3 on page 10 for location)
1. Align the connector with the port opening.
2. Push the connector into the port until it is seated.
P O I N T
The stereo line-in jack will not support an external
microphone.

HEADPHONE JACK

The headphone jack allows you to connect headphones
or powered external speakers to your LifeBook. Your
headphones or speakers must be equipped with a 1/8"
(3.5 mm) stereo mini-plug. In order to connect head-
phones or speakers follow these easy steps:
(See Figure 2-3 on page 10 for location)
1. Align the connector with the port opening.
2. Push the connector into the port until it is seated.
P O I N T
If you plug headphones into the headphone jack, you
will disable the built-in stereo speakers.

DOCKING PORT

The docking port is used for the connection of your Life-
Book to an optional port replicator or docking station.
In order to connect your LifeBook to one of these
devices follow the instructions that came with your
docking port. (See Figure 2-6 on page 14 for location)
U s e r I n s t a l l a b l e F e a t u r e s
C A U T I O N
Some LifeBook's have a sliding panel that encloses the
ports. The sliding panel can be damaged if it is left open
while the LifeBook is moved.

EXTERNAL MONITOR PORT

The external monitor port allows you to connect an
external VGA or SVGA monitor. In order to connect an
external monitor follow these easy steps: (See Figure 2-6
on page 14 for location)
1. Align the connector with the port opening.
2. Push the connector into the port until it is seated.
3. Tighten the two hold-down screws, located on
each end of the connector.
P O I N T
Pressing the [FN] + [F10] keys allows you to change
your selection of where to send your display video.
Each time you press the key combination, you will
step to the next choice, starting with the built-in display
panel only, moving to the external monitor only, finally
moving to both the built-in display panel and an
external monitor.

EXTERNAL FLOPPY DISK DRIVE PORT

The external floppy disk drive port is used for attaching
an optional external floppy disk drive or an optional
modular floppy disk drive with the optional floppy
cable. In order to connect a external floppy disk drive to
your LifeBook follow the instructions that came with
your external floppy disk drive. (See Figure 2-6 on page
14 for location)
69