Auto Insert Notification Function (In Models With Windows 98 Second Edition); Auto Insert Notification Function - Fujitsu Lifebook E6150 User Manual

L i f e B o o k E S e r i e s – S e c t i o n F o u r
To prevent accidental erasure of the data stored on a disk,
slide the "write protect" tab until a small hole is exposed.
This sets the disk into a protected state where nothing can
be added or removed. If you want to add or remove data on
a protected disk, slide the "write protect" tab to close the
small hole. (Figure 4-3)
Super Floppy Disk
Write Protected
Figure 4-3 Floppy Disk Write Protect
C A U T I O N
Formatting a floppy disk that already contains data will
erase all of the information on the disk.

AUTO INSERT NOTIFICATION FUNCTION

(ONLY IN MODELS WITH WINDOWS 98
SECOND EDITION)
The Auto Insert Notification function allows your Life-
Book to automatically see the contents of your floppy
disk as soon as it is inserted in the SuperDisk drive.
Disabling Auto Insert Notification Function
To disable the Auto Insert Notification function, follow
these easy steps:
1. Save all data and close all open applications.
2. From the Start menu, select Settings, and then select
Control Panel.
54
Floppy Disk
Write Enabled
3. Double-click the System icon. This will open the
System Properties dialog box.
4. Select the Device Manager tab to display the device
lists for your LifeBook.
+
5. Click on the to the left of the LS-120 drive icon.
The treeview will expand to show the LS-120 drive
manufacturer's name and model number.
6. Double-click on the LS-120 drive manufacturer's
name and model number. This will open the
LS-120 drive manufacturer's name and model
number dialog box.
7. Select the Settings tab and then remove the check
mark in the Auto Insert Notification Notification
box to turn it off.
8. Click OK.
9. Click Close in the System Properties dialog box, then
click Yes in the System Settings Change pop-up
window when it asks you to restart your machine
and activate this change.
The Auto Insert Notification function can be re-activated
by repeating this process and placing a check mark in the
Auto Insert Notification box to turn it back on.