Starting The Programme; Adding Laundry; Cancelling The Pro- Gramme; Unloading The Laundry - Siemens WG44A1XVZA User Manual And Installation Instructions

Table of Contents

Advertisement

en Childproof lock
Pull out the detergent drawer.
1.
Pour in detergent.
2.
→ "Detergent drawer", Page 18
If required, add the care product.
3.
Push in the detergent drawer.
4.
13.8 Starting the programme
Note: If you want to change the time
until the programme ends, set the
"Ready in" time first.
Press Start/Reload/Pause.
a The drum rotates and load detec-
tion takes place. This can take up
to 2 minutes, after which water
enters the drum.
a The display shows either the pro-
gramme duration or the "Ready in"
time.
a After the programme has ended,
the display shows: End.
13.9 Adding laundry
Press Start/Reload/Pause.
1.
The appliance pauses.
appears, it is not pos-
Note: If
sible to add laundry.
When
goes out, it is possible to
add laundry.
Open the appliance door.
2.
Add or remove laundry.
3.
Close the appliance door.
4.
Press Start/Reload/Pause.
5.
13.10 Cancelling the pro-
gramme
Press Start/Reload/Pause.
1.
Open the appliance door.
2.
The appliance door remains
locked for safety reasons if the
temperature and water levels are
high.
32
– If the temperature is high, start
the
⁠   Rinse programme.
– If the water level is high, start
the Spin programme or select a
suitable programme for draining.
→ "Programmes", Page 25
Remove the laundry → Page 32.
3.
13.11 Unloading the laundry
Open the appliance door.
1.
Remove the laundry.
2.
13.12 Switching off the appli-
ance
Turn the programme selector to
1.
Turn off the tap.
2.
Wipe the rubber gasket dry and re-
3.
move any foreign objects.
Leave the appliance door and de-
4.
tergent drawer open so that resid-
ual water can evaporate.
14 Childproof lock
Secure your appliance against being
operated unintentionally using the
controls.
14.1 Activating the childproof
lock
Press and hold the two
for approx. 3 seconds.
.
buttons

Advertisement

Table of Contents
loading

Table of Contents