Table of Contents
Related Manuals for Siemens WG44G2FXES
Summary of Contents for Siemens WG44G2FXES
- Page 1 Washing machine WG44G2FXES User manual and installation instructions Register your product on My Siemens and discover exclusive services and offers. siemens-home.bsh-group.com/welcome The future moving in. Siemens Home Appliances...
-
Page 2: Table Of Contents
Futher information and explanations are available online: Table of contents 1 Safety ........... 4 7 Display ........ 20 1.1 General information.... 4 8 Buttons ........ 23 1.2 Intended use...... 4 1.3 Restriction on user group.. 4 9 Programmes ...... 25 1.4 Safe installation ...... 5 10 Accessories...... 29 1.5 Safe use ........ - Page 3 15 Intelligent dosing system .. 32 15.1 Starting the programme with intelligent dosing sys- tem......... 32 15.2 Filling the dispensers .... 33 15.3 Basic dosage ...... 34 16 Basic settings...... 35 16.1 Overview of the basic set- tings........ 35 16.2 Changing the basic set- tings........
-
Page 4: Safety
en Safety 1 Safety Observe the following safety instructions. 1.1 General information ¡ Read this instruction manual carefully. ¡ Keep the instruction manual and the product information safe for future reference or for the next owner. ¡ Do not connect the appliance if it has been damaged in transit. 1.2 Intended use Only use this appliance: ¡... -
Page 5: Safe Installation
Safety en 1.4 Safe installation WARNING ‒ Risk of electric shock! Incorrect installation is dangerous. ▶ Connect and operate the appliance only in accordance with the specifications on the rating plate. ▶ Connect the appliance to a power supply with alternating cur- rent only via a properly installed socket with earthing. ▶... - Page 6 en Safety WARNING ‒ Risk of injury! The high weight of the appliance may result in injury when lifted. ▶ Do not lift the appliance on your own. If this appliance is not correctly installed in a washer-dryer stack, the installed appliance may fall. ▶...
-
Page 7: Safe Use
Safety en ▶ Wear protective gloves when installing and transporting the ap- pliance. 1.5 Safe use WARNING ‒ Risk of electric shock! If the appliance or the power cord is damaged, this is dangerous. ▶ Never operate a damaged appliance. ▶ Never pull on the power cord to unplug the appliance. Always unplug the appliance at the mains. - Page 8 en Safety WARNING ‒ Risk of poisoning! Detergents and care products may result in poisoning if con- sumed. ▶ If accidentally swallowed, seek medical advice. ▶ Keep detergents and care products out of the reach of children. WARNING ‒ Risk of explosion! Laundry that has been pretreated with cleaning agents that con- tain solvents may cause an explosion in the appliance.
-
Page 9: Safe Cleaning And Maintenance
Safety en 1.6 Safe cleaning and maintenance WARNING ‒ Risk of electric shock! Incorrect repairs are dangerous. ▶ Repairs to the appliance should only be carried out by trained specialist staff. ▶ Only use genuine spare parts when repairing the appliance. ▶ If the power cord of this appliance is damaged, it must be re- placed by the manufacturer, the manufacturer's Customer Ser- vice or a similarly qualified person in order to prevent any risk. -
Page 10: Preventing Material Damage
en Preventing material damage Make sure that the length of the ▶ 2 Preventing material thread on the connection to the water tap is at least 10 mm. damage If the water pressure is too high or too low, the appliance may not be ATTENTION! able to operate properly. -
Page 11: Environmental Protection And Saving Energy
Environmental protection and saving energy en Remove all detergent residue, Set the maximum spin speed if you ▶ spray residue or other residues im- want to dry the laundry in the tumble mediately if they come into contact dryer afterwards. with the appliance. a The drier the laundry, the shorter the programme duration when dry- ing which, in turn, reduces energy... -
Page 12: Installation And Connection
en Installation and connection Replace the accessories in ques- ▶ 4 Installation and con- tion before operating the appli- ance. nection → "Accessories", Page 29 Note: The appliance has been tested 4.1 Unpacking the appliance at the factory to check it is in working order. As a result, water stains may ATTENTION! remain in the appliance. - Page 13 Installation and connection en If the appliance is tilted at an angle 4.4 Removing the transit greater than 40°, residual water may bolts leak out of the appliance and cause material damage. The appliance is secured for trans- Tilt the appliance carefully. portation using transit bolts on the ▶...
-
Page 14: Connecting The Appliance
en Installation and connection Remove the power cable from the Push the 4 cover caps downwards. holder. Note: To install the transport locks to Remove the 4 sleeves. transport the appliance, perform these steps again in the reverse or- der. 4.5 Connecting the appliance Connecting the water inlet hose WARNING Risk of electric shock! -
Page 15: Aligning The Appliance
Installation and connection en Water outlet connection types 4.6 Aligning the appliance This information is intended to help In order to reduce noise and vibra- you to connect this appliance to the tion and to prevent the appliance water outlet. from moving, align the appliance cor- rectly. -
Page 16: Connecting The Appliance To The Electricity Supply
en Installation and connection Screw the lock nuts tightly against the housing using a WAF 17 wrench. In doing so, hold the foot tight and do not adjust its height. 4.7 Connecting the appliance to the electricity supply Note: Your electrical domestic install- ation for this appliance must comply with the local legal provisions and safety regulations, and should in-... -
Page 17: Familiarising Yourself With Your Appliance
Familiarising yourself with your appliance en 5 Familiarising yourself with your appliance 5.1 Appliance You can find an overview of the parts of your appliance here. On certain models, specific details such as the colour and shape may differ from those pictured. Maintenance flap for the drain Water inlet hose → Page 14 pump → Page 38 Door... -
Page 18: Control Panel
en Familiarising yourself with your appliance Manual dosing compartment : Dispenser for fabric softener : Dispenser for liquid deter- gent 5.3 Control panel You can use the control panel to configure all functions of your appliance and to obtain information about the operating status. Programmes → Page 25 Programme selector → Page 30... -
Page 19: Before Using For The First Time
first time en Add washing powder to the first time 6 Before using for the manual dosing compartment. first time Prepare the appliance for use. first time 6.1 Starting an empty wash- ing cycle Your appliance was inspected thor- oughly before leaving the factory. To remove any residual water, run the first wash cycle without any laundry. - Page 20 en Display 7 Display The display shows the current settings, options or relevant information. Example: Display Display Designation More information 0:40 Programme dura- Expected programme duration or pro- tion/programme gramme time remaining in hours and time remaining minutes. "10" / Programme end → "Buttons", Page 23 time Recommended The maximum load capacity for the selec-...
- Page 21 Display en Display Designation More information Wash Programme status Rinse Programme status Spin Programme status End of pro- Programme status gramme Steaming Programme status Childproof lock ¡ lights up: The childproof lock is activ- ated. ¡ flashes: The childproof lock is activated and the appliance has been operated.
- Page 22 en Display Display Designation More information 50 ml Basic dosage Basic dosage for detergent or fabric softener. → "Basic dosage", Page 34 Door ¡ Lights up: The door is locked and can- not be opened. ¡ Flashes: The door is not closed prop- erly.
-
Page 23: Buttons
Buttons en 8 Buttons The selection of programme settings depends on the programme that is set. Button Selection More information inicio pausa + ¡ Start Start, cancel or pause the pro- carga (Start/Re- gramme. ¡ Cancel load/Pause) ¡ Pause varioSpeed ¡... - Page 24 en Buttons Button Selection More information prelav. (Pre- ¡ Activate Activate or deactivate prewash, e.g. wash) for washing heavily soiled laundry. ¡ Deactivate Note: If the intelligent dosing system is activated, the detergent will be dis- pensed automatically for the prewash and the main wash.
-
Page 25: Programmes
Programmes en 9 Programmes Note: The laundry's care labels provide you with additional information on pro- gramme selection. Programme Description Max. load (kg) algodón / al- Wash hard-wearing items made from cotton, linen godão or blended fabrics. (Cottons) Also suitable as a short programme for normally soiled laundry when you activate ... - Page 26 en Programmes Programme Description Max. load (kg) ¡ Max. 1400 rpm delicado/seda Wash delicate, washable items made from silk, vis- (Delicate/Silk) cose and synthetic fabrics. Use a detergent that is suitable for delicates or silk. Note: Wash especially delicate items or items with hooks, eyelets or clips in a mesh laundry bag.
- Page 27 Programmes en Programme Description Max. load (kg) smartFinish Suitable for shirts, T-shirts and similar fabrics made Five from cotton, linen or blended fabrics. shirts Programme for warming and steaming dry items or five using steam in order to hang them up once the T-shirts programme has ended or to make them easier to iron.
-
Page 28: Laundry
en Programmes Programme Description Max. load (kg) limp. tambor Clean and care for the drum. – (Drum Clean) Use this programme in the following cases: ¡ Before using the appliance for the first time ¡ If you regularly wash at temperatures of 40 °C or lower ¡... -
Page 29: Preparing The Laundry
Accessories en 10 Accessories Use original accessories. These have been made especially for your appliance. Order number Water inlet hose exten- Extend the water inlet WZ10131 sion hose for cold water or AquaStop (approx. 2.50 Fixing brackets Improves the stability of WX975600 the appliance. -
Page 30: Detergents And Care Products
en operation ¡ Do not pour vinegar into the dis- ¡ The setting is saved if you activate pensers → Page 33 of the intelli- or deactivate the intelligent dosing system. gent dosing system 13.4 Loading laundry operation 13 Basic operation Note: To prevent creasing, note the maximum load for the programmes. -
Page 31: Starting The Programme
operation en 13.6 Starting the programme 13.9 Cancelling the pro- gramme Requirement: A programme is set. → "Setting a programme", Page 30 Press inicio pausa + carga. Press inicio pausa + carga. Open the door. ▶ a The drum rotates and load detec- The appliance door remains tion takes place. -
Page 32: Childproof Lock
en Childproof lock Wipe the rubber gasket dry and re- 15 Intelligent dosing sys- move any foreign objects. The optimum quantities of liquid de- tergent and fabric softener are dis- pensed automatically depending on the programme and settings. 15.1 Starting the programme with intelligent dosing system If you do not want to dose liquid de- Leave the appliance door and de-... -
Page 33: Filling The Dispensers
Intelligent dosing system en Requirements 15.2 Filling the dispensers ¡ The laundry is prepared. If you want to use the intelligent dos- → "Preparing the laundry", Page 29 ing system or if the appliance dis- ¡ The laundry is sorted. plays a notification during operation ¡... -
Page 34: Basic Dosage
en Intelligent dosing system Pour liquid detergent and fabric To adjust the basic dosage for softener into the relevant dis- press i-Dos. pensers. To adjust the setting, press ter- → "Detergent drawer", Page 17 min.. To end the setting process, wait briefly. -
Page 35: Basic Settings
Basic settings en 16 Basic settings You can configure the basic settings for your appliance to meet your needs. 16.1 Overview of the basic settings Basic setting Programme Value Description position End signal 0 (off) Set the volume of the signal at the 1 (quiet) end of the programme. -
Page 36: Changing The Basic Set- Tings
en Programme counter 16.2 Changing the basic set- 18 Cleaning and servi- tings cing Set the programme selector to po- To keep your appliance working effi- sition 1. ciently for a long time, it is important to clean and maintain it carefully. 18.1 Cleaning the drum CAUTION Risk of injury! Permanently washing at low temper-... - Page 37 Cleaning and servicing en Switch off the appliance. Empty the detergent drawer. → "Switching off the appliance", Page 31 Pull out the detergent drawer. Press down on the insert and re- move the detergent drawer. Clean the pump unit with a damp cloth. Remove the pump unit.
-
Page 38: Cleaning The Drain Pump
en Cleaning and servicing Switch off the appliance. → "Switching off the appliance", Page 31 Disconnect the appliance's mains plug from the power supply. Open and remove the service flap. Slide a sufficiently large container under the opening. Clean the housing of the detergent drawer in the appliance. - Page 39 Cleaning and servicing en Cleaning the drain pump CAUTION - Risk of scalding! When you wash at high temperat- Requirement: The drain pump is ures, the detergent solution gets empty. → Page 38 hot. Since water may remain in the Do not touch the hot detergent ▶...
- Page 40 en Cleaning and servicing Insert the pump cap. Insert and close the service flap. Ensure that the parts of the ‒ pump cap are correctly as- sembled. Before the next wash To prevent unused detergent from flowing straight into the outlet in the Screw the pump cap as far as it next wash, run a suitable programme will go.
-
Page 41: Troubleshooting
Troubleshooting en 19 Troubleshooting You can rectify minor faults on your appliance yourself. Read the troubleshoot- ing information before contacting after-sales service. This will avoid unneces- sary costs. WARNING Risk of electric shock! Incorrect repairs are dangerous. Repairs to the appliance should only be carried out by trained specialist ▶... - Page 42 en Troubleshooting Fault Cause and troubleshooting "E:36 / -10" Immediate measure: Mix one tablespoon of fabric ▶ softener with 0.5 litres of water and pour the mix- ture into the compartment for manual dosing (not for outdoor clothing, sportswear or items stuffed with down).
- Page 43 Troubleshooting en Fault Cause and troubleshooting "E:30 / -10" and/or To reset the error message, switch the appliance off. Switch the appliance back on. If the error message is displayed again, call cus- tomer service. → "Customer Service", Page 53 "E:35 / -10" There is water in the base trough.
- Page 44 en Troubleshooting Fault Cause and troubleshooting "E:30/-20" If you dose manually, reduce the amount of deter- ▶ gent for the next washing cycle with the same load. Additional water is added. Do not add any extra water to the appliance while it ▶...
- Page 45 Troubleshooting en Fault Cause and troubleshooting The door cannot The temperature is too high. be opened. Wait until the temperature has dropped. ▶ Cancel the programme. ▶ → "Cancelling the programme", Page 31 Water level is too high. Select a suitable programme for draining. ▶...
- Page 46 en Troubleshooting Fault Cause and troubleshooting The water is not drain- Ensure that the pump cap is screwed in all the way ▶ ing. into the appliance. The handle on the pump cap must be in a vertical position. Water is not flowing You have not pressed inicio pausa + carga.
- Page 47 Troubleshooting en Fault Cause and troubleshooting Vibrations and move- Appliance is not correctly aligned. ment of the appliance → "Aligning the appliance", Page 15 ▶ whilst spinning. The appliance feet are not fixed. Secure the appliance feet. ▶ → "Aligning the appliance", Page 15 Transit bolts have not been removed. → "Removing the transit bolts", Page 13.
- Page 48 en Troubleshooting Fault Cause and troubleshooting The spin programme Drain pipe or water outlet hose is blocked. does not start. Clean the drain pipe and the water outlet hose. ▶ Drain pipe or water drain hose is caught or jammed. Ensure that the drain pipe and water drain hose are ▶...
- Page 49 Troubleshooting en Fault Cause and troubleshooting Creasing. The next time you run a wash cycle, reduce the ▶ amount of laundry being loaded. Unsuitable programme for the type of fabric. Select the programmes that are suitable for the ▶ type of fabric. The spin result is not A low spin speed is selected.
- Page 50 en Troubleshooting Fault Cause and troubleshooting Detergent residue on Drain the dispenser. the damp washing. → "Cleaning the detergent drawer", Page 36 Clean the dispenser. Refill the dispenser. → "Filling the dispensers", Page 33 Basic dosage is not correctly adjusted. If intelligent dosing is activated, reduce the basic ▶...
- Page 51 Troubleshooting en Fault Cause and troubleshooting Insufficient cleaning. Clean the dispenser. Refill the dispenser. → "Filling the dispensers", Page 33 Water is leaking out at Water inlet hose is not correctly/securely connected. the water inlet hose. Connect the water supply hose correctly. → "Connecting the water inlet hose", Page 14 Tighten the screw connection.
-
Page 52: Emergency Release
en Transportation, storage and disposal 19.1 Emergency release 20.2 Inserting the transit bolts Releasing the door Secure the appliance before trans- Requirement: The drain pump is portation using transit bolts in order empty. → Page 38 to prevent transport damage. ATTENTION! Escaping water may Use a screwdriver to remove the 4 cause material damage. -
Page 53: Disposing Of Old Appliance
Customer Service en 20.4 Disposing of old appli- 21 Customer Service ance Function-relevant genuine spare parts Valuable raw materials can be re- according to the corresponding Eco- used by recycling. design Order can be obtained from Customer Service for a period of at WARNING least 10 years from the date on Risk of harm to health! -
Page 54: Aqua-Stop Guarantee
en Customer Service 21.2 AQUA-STOP guarantee In addition to warranty claims against the seller under the purchase agree- ment and in addition to our manufac- turer's warranty, we offer compensa- tion under the following conditions. ¡ If our Aqua-Stop system is defect- ive and causes water damage, we will make good the damage for private users. -
Page 55: Consumption Values
Consumption values en 22 Consumption values The following information is provided in accordance with the EU Ecodesign Regulation. The values given for programs other than the eco 40-60 are indicat- ive only and were determined in accordance with the applicable standard EN60456. The automatic dosing function has been deactivated for this pur- pose. -
Page 56: Technical Data
en Technical data Water pressure ¡ Minimum: 23 Technical data 100 kPa (1 bar) ¡ Maximum: Appliance height 84.8 cm 1000 kPa Appliance width 59.8 cm (10 bar) Appliance depth 59.0 cm Length of the wa- 150 cm Appliance depth 63.6 cm ter inlet hose with door closed Length of the wa- 150 cm Appliance depth 107.3 cm... - Page 60 Valid within Great Britain: Imported to Great Britain by BSH Home Appliances Ltd. Grand Union House Old Wolverton Road Wolverton, Milton Keynes MK12 5PT United Kingdom Manufactured by BSH Hausgeräte GmbH under the trademark licence of Siemens AG *9001775856* 9001775856 (021130)