Fujitsu Lifebook E335 Manual page 45

8. Click on the CD-ROM drive manufacturer's
name and model.
9. Click on Properties. The CD-ROM drive
manufacturer's name and model properties
dialogue box will be displayed.
10. Click on the Settings tab.
11. Click on the automatic insertion notification
box to toggle it off.
12. Click on OK.
13. Click on OK in the system properties
dialogue box.
14. Restart your notebook according to the
message displayed.
You can re-enable the function by repeating the
process except in step 11 change the setting to on.
Hard Drive or Removable
Media Drive Access Indicator
The Hard Drive Access indicator tells you when
either the internal hard drive, an optional
second hard drive or an optional Zip drive
is being accessed.
U s i n g Y o u r L i f e B o o k E S e r i e s
P O I N T
The Hard Drive Access indicator does
not show which hard drive or Zip drive,
is being accessed. It works the same for
any one.
Floppy Disk Drive Access Indicator
The Floppy Disk Drive Access indicator tells you
when a floppy disk drive or SuperDisk drive is
being accessed. The Floppy Disk Drive Access
indicator will flash when your software tries to
access a floppy disk or SuperDisk even if no
floppy disk drive or SuperDisk drive is installed.
PC Card Access Indicators
The PC Card Access indicators tell you when
an installed PC Card is being accessed. Card 1
is the bottom connector inside the slot and
Card 2 is the upper connector inside the card
slot. Type III cards are always Card 1 only.
The PC Card Access indicator will flash if
your software tries to access a PC Card even
if none are installed.
L i f e B o o k E S e r i e s f r o m F u j i t s u
NumLk Indicator
The NumLk indicator tells you the internal key-
board is set in ten-key numeric keypad mode.
(See page 36 for more information on the numeric
keypad.) You can activate the NumLk mode by
pressing the NumLk/Scr Lk key while holding
down the Shift key. Deactivate the setting the
same way that you activated it.
CapsLock Indicator
The CapsLock indicator tells you when the key-
board is set for all capital letters. Activate the all
capital letters setting by pressing the CapsLock
key on the keyboard. Deactivate the setting the
same way that you activated it.
Scr Lk Indicator
The Scr Lk indicator tells you when scroll lock
is active. You can activate the scroll lock by
pressing the NumLk/Scr Lk key. Deactivate the
setting the same way that you activated it.
31