Section One; Setting Up Your Lifebooke Series From Fujitsu; Unpacking - Fujitsu Lifebook E335 Manual

S e c t i o n O n e

SECTION ONE

SETTING UP YOUR LIFEBOOK
E SERIES FROM FUJITSU
This section describes how to set up your
LifeBook E Series from Fujitsu. We strongly
recommend that you read it before using your
notebook – even if you are already familiar with
notebook computers.

UNPACKING

When you receive your notebook, unpack it
carefully, and compare the parts you have
received with the items listed below and with
your packing label.
For a standard configuration you should have:
(Your configuration may be different.)
LifeBook E Series from Fujitsu.
(Figure 1-1.)
AC adapter with AC power cord (located in
the accessories box). (Figure 1-2.)
Modular Lithium ion battery. (Already
installed in Multi-function Bay 1 of
your notebook.)
2
Modular 24x maximum CD-ROM drive.
(Already installed in Multi-function Bay 2
of your notebook.)
Modular 3.5" floppy disk drive (located in the
accessories box). (Figure 1-4.)
Battery adapter for Multi-function Bay 2
(located in the accessories box.) (Figure 1-3.)
Weight Saver for Multi-function Bay 2
(located in the accessories box.)(Figure 1-5.)
RJ-11 cable (located in the accessories box).
Getting Started Guide and User's Guide.
Microsoft Windows 95, Windows 98 or
Windows NT 4.0 Manual.
Registration card and customer
information pack.
Recovery CD-ROM
(located in the accessories box).
Figure 1-1 LifeBook E Series Notebook
Figure 1-2 AC Adapter Unit
P O I N T
You may have different options than
those listed if you have a built-to-order
LifeBook E Series.