Table of Contents
Advertisement
Symptom
When switching ports,
the monitor does not
display.
When switching ports,
there is a several
second delay before
the change happens.
When switching ports
with the mouse wheel,
and I want to switch
across two ports (from
Port1 to Port 3, for
example), sometimes
the change doesn't
happen.
Possible Cause
Monitor is new or this
is the first time
installation.
The monitor's EDID
has not passed
through to the PC
when switching ports
This can occur when
keyboard emulation is
disabled.
The switch needs
more time to process
the mouse input.
Action
Switch ports again and wait two or
more seconds for the monitor's EDID
to pass to the PC.
Use the [d] hotkey to invoke Video
DynaSync one more time or switch to
another PC to reconnect the CS1762
/ CS1764
. See HSM Summary
A
Table, page 28.
Use the [F10] hotkey to enable
keyboard emulation. See HSM
Summary Table, page 28.
Wait 3 – 4 seconds between ports
before clicking for the next port.
Appendix
A
45
Advertisement
Table of Contents
