How The Air Conditioner Works - Toshiba MMK-AP0074MHP-E Owner's Manual

High-Wall Type
SMMS High-Wall Type
11.

How the Air Conditioner Works

NOTE
This manual describes wireless remote control
specific operations.
For other operations, refer to the operation manual
supplied with the outdoor unit.
Hi POWER operation
When the Hi POWER button is pushed during
cooling, heating or A operation, the air conditioner
will start the following operation.
• Cooling operation
Performs the cooling operation at 1 °C lower
than the setting temperature.
Only when the fan speed before the Hi POWER
operation is not high, the fan speed will be
increased.
• Heating operation
Performs the heating operation at 2 °C higher
than the setting temperature.
Only when the fan speed before the Hi POWER
operation is not high, the fan speed will be
increased.
ECO timer operation
When the ECO button is pushed during cooling,
heating or AUTO operation, the air conditioner will
start the following operation.
The fan speed display will indicate AUTO and low
speed will be used.
• Cooling operation
In the operation suppression zone, where
capacity is kept to the minimum, over cooling is
prevented by raising the temperature setting by
1 °C after 1 hour and by 2 °C after 2 hours of
operation. The room temperature is thus
regulated between the operation suppression
zone and the set temperature.
1 °C
1 hour
2 hours
27-EN
Operation suppression zone
2 °C
Set temperature
• Heating operation
In the operation suppression zone, where
capacity is kept to the minimum, overheating is
prevented by lowering the temperature setting by
1 °C after 1 hour and by 2 °C after 2 hours of
operation.
The room temperature is thus regulated between
the set temperature and the operation
suppression zone.
Set temperature
1 °C
1 hour
2 hours
CAUTION
ECO-TIMER operation is not available for group
control. When ECO-TIMER is transmitted to the
main unit, the receiving sound is heard but the
ECO-TIMER operation will not be performed.
Display panel on the remote control will change to
ECO-TIMER setting display. Cancel the setting,
push cancel button.
– 27 –
Owner's Manual
2 °C
Operation
suppression zone