Toshiba MMK-AP0074MHP-E Owner's Manual page 24

High-Wall Type
SMMS High-Wall Type
Adjusting airflow direction
• Adjust the airflow direction properly. Otherwise, it
might cause discomfort and make the room
temperature uneven.
• Adjust the vertical airflow using the remote
controller.
• Adjust the horizontal airflow manually.
Adjust the vertical airflow
The air conditioner automatically adjusts the
vertical airflow direction in accordance with the
operating conditions when AUTO or A mode is
selected.
To set the airflow direction you desire
Perform this function when the air conditioner is in
operation.
1
1
FIX button
Keep pushing or pushing briefly the FIX button on the
remote controller to move the louver in the desired
direction.
• In subsequent operations, the vertical airflow is
automatically set in the direction to which you
adjusted the louver using the FIX button.
NOTE
Operating angle of vertical airflow louver will be
different during cooling, dry and heating operation.
23-EN
PRESET
START/STOP
FAN MODE AUTO
SWING ECO Hi-POWER
TIMER
FIX MEMO
ON OFF SET CLR
FILTER
RESET CLOCK CHECK
To automatically swing the airflow
direction
Perform this function when the air conditioner is in
operation.
1
1
SWING button
Push the SWING button on the remote controller.
• To stop the function, push the SWING button.
– 23 –
Owner's Manual
PRESET
START/STOP
FAN MODE AUTO
SWING ECO Hi-POWER
TIMER
FIX MEMO
ON OFF SET CLR
FILTER
RESET CLOCK CHECK